[PATCH 06/10] mtd: spi-nor: add SPI_NOR_DUAL_READ to some flash devices

[Cédric Le Goater]

On 04/06/2017 09:22 PM, Marek Vasut wrote:
> On 04/06/2017 06:56 PM, Cédric Le Goater wrote:
>> These devices are used on OpenPOWER systems.
>>
>> Signed-off-by: Cédric Le Goater <clg at kaod.org>
>> ---
>>  The lines are over 80 characters but it looks better.
>>
>>  drivers/mtd/spi-nor/spi-nor.c | 8 ++++----
>>  1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index ee777df4466c..0821e3211867 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -1016,10 +1016,10 @@ static const struct flash_info spi_nor_ids[] = {
>>  	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
>>  	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
>>  	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
>> -	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) },
>> +	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ) },
>>  	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K) },
>>  	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
>> -	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) },
>> +	{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>>  	{ "mx66l1g45g",  INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>>  	{ "mx66l1g55g",  INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
>>  
>> @@ -1031,7 +1031,7 @@ static const struct flash_info spi_nor_ids[] = {
>>  	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
>>  	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
>>  	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
>> -	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
>> +	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
>>  	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
>>  	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
>>  	{ "n25q00",      INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
>> @@ -1150,7 +1150,7 @@ static const struct flash_info spi_nor_ids[] = {
>>  	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
>>  	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
>>  	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
>> -	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
>> +	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ) },
> 
> All of them probably support quad too ... also unrelated to this series,
> separate patch please.

ok. I will check for quad support and resend patch 5 and 6 in a separate patchset.

Thanks

C. 

> 
>>  	/* Catalyst / On Semiconductor -- non-JEDEC */
>>  	{ "cat25c11", CAT25_INFO(  16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
>>
> 
>