[PATCH v4] mtd: nand: automate NAND timings selection

[Boris Brezillon]

On Thu, 15 Sep 2016 10:32:44 +0200
Sascha Hauer <s.hauer at pengutronix.de> wrote:

> This series aims at automating the NAND timings selection which is
> currently supposed to be done in each NAND controller driver, thus
> simplifying drivers implementation.
> 
> As suggested by Boris this version of the series introduces a nand_reset()
> function which replaces the several open coded NAND_CMD_RESET commands
> in the code. This makes sure we can apply the timing each time after
> after reset.
> 
> Also I have brought back the conversion patch for teh sunxi driver whic
> was part of Boris initial posting. It's untested due to the lack of hardware,
> so please test before applying.

Applied after fixing a few coding style issues (to make checkpatch
happy), and exporting the onfi_init_data_interface() function (not sure
it's the best solution, but at least, it's consistent with the other
functions defined in nand_timings.c).

Thanks,

Boris

> 
> Sascha
> 
> Changes since v4:
> - Change onfi_init_data_interface() prototype to be more future proof as
>   requested by Boris
> 
> Changes since v3:
> - Bring back patch dropped in v3
> - Use statically allocated default timing for all chips and store one
>   optimized timing in struct nand_chip
> 
> Changes since v2:
> - Add accessor function to get the SDR timing from struct nand_data_interface
> - Change nand_reset() argument to struct nand_chip
> - Drop conversion of nand_timing array to struct nand_data_interface
> - Recalculate timing whenever needed instead of storing a pointer in struct
>   nand_chip
> - some more refactoring
> 
> Changes since v1:
> - create a nand_reset() function to create a single place to reset NAND
>   chips and to apply timings
> - Add patch to convert sunxi driver for automated timing setup
> - split into more patches
> 
> Changes since the initial posting from Boris:
> 
> - Integrate Feedback from Ezequiel Garcia
> - When iterating over the chips calling onfi_set_features() for each
>   bail out when any of the calls fail, not only the last one.
> - When one of the onfi_set_features() calls fail then reset the chipi
>   afterwards.
> - Drop Sunxi example, add patch for the mxc_nand controller instead.
> 
> ----------------------------------------------------------------
> 
> Boris Brezillon (1):
>       mtd: nand: automate NAND timings selection
> 
> Sascha Hauer (8):
>       mtd: nand: Create a NAND reset function
>       mtd: nand: Introduce nand_data_interface
>       mtd: nand: convert ONFI mode into data interface
>       mtd: nand: Add function to convert ONFI mode to data_interface
>       mtd: nand: Expose data interface for ONFI mode 0
>       mtd: nand: sunxi: switch from manual to automated timing config
>       mtd: nand: mxc: implement onfi get/set features
>       mtd: nand: mxc: Add timing setup for v2 controllers
> 
>  drivers/mtd/nand/mxc_nand.c     | 133 ++++++++++++
>  drivers/mtd/nand/nand_base.c    | 179 ++++++++++++++-
>  drivers/mtd/nand/nand_timings.c | 469 ++++++++++++++++++++++------------------
>  drivers/mtd/nand/sunxi_nand.c   |  76 ++-----
>  include/linux/mtd/nand.h        | 190 +++++++++++-----
>  5 files changed, 721 insertions(+), 326 deletions(-)