[PATCH v4] mtd: spi-nor: Add support for S3AN spi-nor devices
Ricardo Ribalda Delgado
ricardo.ribalda at gmail.com
Fri Sep 16 02:23:58 PDT 2016
This is the monthly ping :)
Anything I can do help to merge this?
Regards!
On Wed, Aug 10, 2016 at 11:12 AM, Ricardo Ribalda Delgado
<ricardo.ribalda at gmail.com> wrote:
> ping?
>
> On Thu, Jul 14, 2016 at 10:18 PM, Ricardo Ribalda Delgado
> <ricardo.ribalda at gmail.com> wrote:
>> Xilinx Spartan-3AN FPGAs contain an In-System Flash where they keep
>> their configuration data and (optionally) some user data.
>>
>> The protocol of this flash follows most of the spi-nor standard. With
>> the following differences:
>>
>> - Page size might not be a power of two.
>> - The address calculation (default addressing mode).
>> - The spi nor commands used.
>>
>> Protocol is described on Xilinx User Guide UG333
>>
>> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda at gmail.com>
>> ---
>> v4:
>> -Rebase on top of l2-mtd/master
>>
>> v3:
>> -Rebase on top of mtd-next
>> -Rename ADDR_NATIVE to ADDR_DEFAULT to follow UG333 naming
>> -Fix bug on probe
>>
>> v2: Suggested by Brian Norris <computersforpeace at gmail.com>
>>
>> -Remove inline qualifier
>> -Improve documentation of Default Addressing Mode
>> -Convert function callbacks into SNOR_F_
>> -Fix missmatch braces
>> -Improve documentation of SPI_S3AN flag
>>
>> drivers/mtd/devices/m25p80.c | 3 ++
>> drivers/mtd/spi-nor/spi-nor.c | 110 ++++++++++++++++++++++++++++++++++++++++--
>> include/linux/mtd/spi-nor.h | 26 ++++++++++
>> 3 files changed, 136 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
>> index 9cf7fcd28034..a44465f2b73d 100644
>> --- a/drivers/mtd/devices/m25p80.c
>> +++ b/drivers/mtd/devices/m25p80.c
>> @@ -49,6 +49,9 @@ static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len)
>>
>> static void m25p_addr2cmd(struct spi_nor *nor, unsigned int addr, u8 *cmd)
>> {
>> + if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
>> + addr = spi_nor_s3an_addr_convert(nor, addr);
>> +
>> /* opcode is in cmd[0] */
>> cmd[1] = addr >> (nor->addr_width * 8 - 8);
>> cmd[2] = addr >> (nor->addr_width * 8 - 16);
>> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
>> index d0fc165d7d66..dce0a2f156e1 100644
>> --- a/drivers/mtd/spi-nor/spi-nor.c
>> +++ b/drivers/mtd/spi-nor/spi-nor.c
>> @@ -75,6 +75,12 @@ struct flash_info {
>> * bit. Must be used with
>> * SPI_NOR_HAS_LOCK.
>> */
>> +#define SPI_S3AN BIT(10) /*
>> + * Xilinx Spartan 3AN In-System Flash
>> + * (MFR cannot be used for probing
>> + * because it has the same value as
>> + * ATMEL flashes)
>> + */
>> };
>>
>> #define JEDEC_MFR(info) ((info)->id[0])
>> @@ -217,6 +223,21 @@ static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info,
>> return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1);
>> }
>> }
>> +
>> +static int s3an_sr_ready(struct spi_nor *nor)
>> +{
>> + int ret;
>> + u8 val;
>> +
>> + ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
>> + if (ret < 0) {
>> + pr_err("error %d reading XRDSR\n", (int) ret);
>> + return ret;
>> + }
>> +
>> + return !!(val & XSR_RDY);
>> +}
>> +
>> static inline int spi_nor_sr_ready(struct spi_nor *nor)
>> {
>> int sr = read_sr(nor);
>> @@ -238,7 +259,9 @@ static inline int spi_nor_fsr_ready(struct spi_nor *nor)
>> static int spi_nor_ready(struct spi_nor *nor)
>> {
>> int sr, fsr;
>> - sr = spi_nor_sr_ready(nor);
>> +
>> + sr = nor->flags & SNOR_F_READY_XSR_RDY ? s3an_sr_ready(nor) :
>> + spi_nor_sr_ready(nor);
>> if (sr < 0)
>> return sr;
>> fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
>> @@ -320,6 +343,23 @@ static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
>> }
>>
>> /*
>> + * This code converts an address to the Default Address Mode, that has non
>> + * power of two page sizes. We must support this mode because it is the default
>> + * mode supported by Xilinx tools, it can access the whole flash area and
>> + * changing over to the Power-of-two mode is irreversible and corrupts the
>> + * original data.
>> + */
>> +unsigned int spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
>> +{
>> + unsigned int offset;
>> +
>> + offset = (nor->page_size == 264) ? (addr % 264) : (addr % 528);
>> +
>> + return ((addr - offset) << 1) | offset;
>> +}
>> +EXPORT_SYMBOL_GPL(spi_nor_s3an_addr_convert);
>> +
>> +/*
>> * Initiate the erasure of a single sector
>> */
>> static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
>> @@ -330,6 +370,9 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
>> if (nor->erase)
>> return nor->erase(nor, addr);
>>
>> + if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
>> + addr = spi_nor_s3an_addr_convert(nor, addr);
>> +
>> /*
>> * Default implementation, if driver doesn't have a specialized HW
>> * control
>> @@ -368,7 +411,7 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
>> return ret;
>>
>> /* whole-chip erase? */
>> - if (len == mtd->size) {
>> + if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
>> unsigned long timeout;
>>
>> write_enable(nor);
>> @@ -782,6 +825,19 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
>> .addr_width = (_addr_width), \
>> .flags = (_flags),
>>
>> +#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
>> + .id = { \
>> + ((_jedec_id) >> 16) & 0xff, \
>> + ((_jedec_id) >> 8) & 0xff, \
>> + (_jedec_id) & 0xff \
>> + }, \
>> + .id_len = 3, \
>> + .sector_size = (8*_page_size), \
>> + .n_sectors = (_n_sectors), \
>> + .page_size = _page_size, \
>> + .addr_width = 3, \
>> + .flags = SPI_NOR_NO_FR | SPI_S3AN,
>> +
>> /* NOTE: double check command sets and memory organization when you add
>> * more nor chips. This current list focusses on newer chips, which
>> * have been converging on command sets which including JEDEC ID.
>> @@ -1009,6 +1065,13 @@ static const struct flash_info spi_nor_ids[] = {
>> { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
>> { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
>> { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
>> +
>> + /* Xilinx S3AN Internal Flash */
>> + { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
>> + { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
>> + { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
>> + { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
>> + { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
>> { },
>> };
>>
>> @@ -1171,7 +1234,13 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
>> for (i = 0; i < len; ) {
>> ssize_t written;
>>
>> - page_offset = (to + i) & (nor->page_size - 1);
>> + if (hweight32(nor->page_size) == 1)
>> + page_offset = to & (nor->page_size - 1);
>> + else {
>> + uint64_t aux = to;
>> +
>> + page_offset = do_div(aux, nor->page_size);
>> + }
>> WARN_ONCE(page_offset,
>> "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.",
>> page_offset);
>> @@ -1300,6 +1369,35 @@ static int spi_nor_check(struct spi_nor *nor)
>> return 0;
>> }
>>
>> +static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor)
>> +{
>> + int ret;
>> + u8 val;
>> +
>> + ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
>> + if (ret < 0) {
>> + pr_err("error %d reading XRDSR\n", (int) ret);
>> + return ret;
>> + }
>> +
>> + nor->erase_opcode = SPINOR_OP_XSE;
>> + nor->program_opcode = SPINOR_OP_XPP;
>> + nor->read_opcode = SPINOR_OP_READ;
>> + nor->flags |= SNOR_F_NO_OP_CHIP_ERASE | SNOR_F_READY_XSR_RDY;
>> +
>> + /* Flash in Power of 2 mode */
>> + if (val & XSR_PAGESIZE) {
>> + nor->page_size = (nor->page_size == 264) ? 256 : 512;
>> + nor->mtd.writebufsize = nor->page_size;
>> + nor->mtd.size = 8 * nor->page_size * info->n_sectors;
>> + nor->mtd.erasesize = 8 * nor->page_size;
>> + } else {
>> + nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>> {
>> const struct flash_info *info = NULL;
>> @@ -1505,6 +1603,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
>>
>> nor->read_dummy = spi_nor_read_dummy_cycles(nor);
>>
>> + if (info->flags & SPI_S3AN) {
>> + ret = s3an_nor_scan(info, nor);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> dev_info(dev, "%s (%lld Kbytes)\n", info->name,
>> (long long)mtd->size >> 10);
>>
>> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
>> index c425c7b4c2a0..6378de414bca 100644
>> --- a/include/linux/mtd/spi-nor.h
>> +++ b/include/linux/mtd/spi-nor.h
>> @@ -68,6 +68,15 @@
>> #define SPINOR_OP_WRDI 0x04 /* Write disable */
>> #define SPINOR_OP_AAI_WP 0xad /* Auto address increment word program */
>>
>> +/* Used for S3AN flashes only */
>> +#define SPINOR_OP_XSE 0x50 /* Sector erase */
>> +#define SPINOR_OP_XPP 0x82 /* Page program */
>> +#define SPINOR_OP_XRDSR 0xd7 /* Read status register */
>> +
>> +#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */
>> +#define XSR_RDY BIT(7) /* Ready */
>> +
>> +
>> /* Used for Macronix and Winbond flashes. */
>> #define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */
>> #define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */
>> @@ -119,6 +128,9 @@ enum spi_nor_ops {
>> enum spi_nor_option_flags {
>> SNOR_F_USE_FSR = BIT(0),
>> SNOR_F_HAS_SR_TB = BIT(1),
>> + SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
>> + SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
>> + SNOR_F_READY_XSR_RDY = BIT(4),
>> };
>>
>> /**
>> @@ -197,6 +209,20 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
>> return mtd_get_of_node(&nor->mtd);
>> }
>>
>> +
>> +/**
>> + * spi_nor_s3an_addr_convert() - convert an address to Default Address Mode
>> + * @nor: the spi_nor structure
>> + * @addr: the contiguous address value
>> + *
>> + * Spartan-3AN In-System Flash requires an special address mode to access its
>> + * whole Flash area. This address mode, named Default Address Mode by Xilinx,
>> + * has non power of two page sizes.
>> + *
>> + * Return: Address in Default Address Mode
>> + */
>> +unsigned int spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr);
>> +
>> /**
>> * spi_nor_scan() - scan the SPI NOR
>> * @nor: the spi_nor structure
>> --
>> 2.8.1
>>
>
>
>
> --
> Ricardo Ribalda
--
Ricardo Ribalda
More information about the linux-mtd
mailing list