[PATCH 5/9] mtd: nand: Expose data interface for ONFI mode 0

[Boris Brezillon]

On Thu, 15 Sep 2016 10:32:49 +0200
Sascha Hauer <s.hauer at pengutronix.de> wrote:

> The nand layer will need ONFI mode 0 to use it as timing mode
> before and right after reset.
> 
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> ---
>  drivers/mtd/nand/nand_timings.c | 11 +++++++++++
>  include/linux/mtd/nand.h        |  2 ++
>  2 files changed, 13 insertions(+)
> 
> diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c
> index 608d098..9cdbc16 100644
> --- a/drivers/mtd/nand/nand_timings.c
> +++ b/drivers/mtd/nand/nand_timings.c
> @@ -297,3 +297,14 @@ int onfi_init_data_interface(struct nand_chip *chip,
>  
>  	return 0;
>  }
> +
> +/**
> + * nand_get_default_data_interface - [NAND Interface] Retrieve NAND
> + * data interface for mode 0. This is used as default timing after
> + * reset.
> + */
> +const struct nand_data_interface *nand_get_default_data_interface(void)
> +{
> +	return &onfi_sdr_timings[0];
> +}
> +EXPORT_SYMBOL(nand_get_default_data_interface);

You export nand_get_default_data_interface() here, but you don't export
onfi_init_data_interface().
None of these functions should be called from NAND controller drivers,
so they don't need to be exported. ITOH, the prototypes are public
(defined in nand.h), so nothing prevents a driver from calling these
functions.

I don't know what's the best solution here:
1/ Export both nand_get_default_data_interface() and
   onfi_init_data_interface()
2/ Do not export them, but keep their prototypes in nand.h with a
   comment saying that they should not be directly called by NAND
   controller drivers
3/ Removing the prototypes from nand.h and defining them in nand_base.c
   (or in a private header).

Brian, Richard, Sascha, any comments?

> diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
> index 7216f54..29ae324 100644
> --- a/include/linux/mtd/nand.h
> +++ b/include/linux/mtd/nand.h
> @@ -1146,6 +1146,8 @@ static inline int jedec_feature(struct nand_chip *chip)
>  
>  /* get timing characteristics from ONFI timing mode. */
>  const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
> +/* get data interface from ONFI timing mode 0, used after reset. */
> +const struct nand_data_interface *nand_get_default_data_interface(void);
>  
>  int nand_check_erased_ecc_chunk(void *data, int datalen,
>  				void *ecc, int ecclen,