[PATCH v3 7/9] mtd: fsl-quadspi: Solve Micron Spansion flash command conflict

[Han Xu]

On Thu, Aug 18, 2016 at 2:38 AM, Yunhui Cui <B56489 at freescale.com> wrote:
> From: Yunhui Cui <yunhui.cui at nxp.com>
>
> Add some lut_tables to support quad mode for flash n25q128
> on the board ls1021a-twr and solve flash Spansion and Micron
> command conflict.
> In switch {}, The value of command SPINOR_OP_RD_EVCR and
> SPINOR_OP_SPANSION_RDAR is the same. They have to share
> the same seq_id: SEQID_RDAR_OR_RD_EVCR.
>
> Signed-off-by: Yunhui Cui <yunhui.cui at nxp.com>
> ---
>  drivers/mtd/spi-nor/fsl-quadspi.c | 47 ++++++++++++++++++++++++++++++---------
>  1 file changed, 36 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index 57eed3c..f9a7d4b 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -207,9 +207,9 @@
>  #define SEQID_RDCR             9
>  #define SEQID_EN4B             10
>  #define SEQID_BRWR             11
> -#define SEQID_RDAR             12
> +#define SEQID_RDAR_OR_RD_EVCR  12
>  #define SEQID_WRAR             13
> -
> +#define SEQID_WD_EVCR           14
>
>  #define QUADSPI_MIN_IOMAP SZ_4M
>
> @@ -393,6 +393,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
>         int rxfifo = q->devtype_data->rxfifo;
>         u32 lut_base;
>         int i;
> +       const struct fsl_qspi_devtype_data *devtype_data = q->devtype_data;
>
>         struct spi_nor *nor = &q->nor[0];
>         u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
> @@ -489,16 +490,26 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
>         qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
>                         base + QUADSPI_LUT(lut_base));
>
> +
>         /*
> -        * Read any device register.
> -        * Used for Spansion S25FS-S family flash only.
> +        * Flash Micron and Spansion command confilict
> +        * use the same value 0x65. But it indicates different meaning.
>          */
> -       lut_base = SEQID_RDAR * 4;
> -       qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) |
> -                       LUT1(ADDR, PAD1, ADDR24BIT),
> -                       base + QUADSPI_LUT(lut_base));
> -       qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1),
> -                       base + QUADSPI_LUT(lut_base + 1));
> +       lut_base = SEQID_RDAR_OR_RD_EVCR * 4;
> +       if (devtype_data->devtype == FSL_QUADSPI_LS2080A) {
> +               /*
> +               * Read any device register.
> +               * Used for Spansion S25FS-S family flash only.
> +               */
> +               qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) |
> +                           LUT1(ADDR, PAD1, ADDR24BIT),
> +                           base + QUADSPI_LUT(lut_base));
> +               qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1),
> +                           base + QUADSPI_LUT(lut_base + 1));
> +       } else {
> +               qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RD_EVCR),
> +                           base + QUADSPI_LUT(lut_base));
> +       }
>
>         /*
>          * Write any device register.
> @@ -511,6 +522,11 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
>         qspi_writel(q, LUT0(FSL_WRITE, PAD1, 1),
>                         base + QUADSPI_LUT(lut_base + 1));
>
> +       /* Write EVCR register */
> +       lut_base = SEQID_WD_EVCR * 4;
> +       qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WD_EVCR),
> +                   base + QUADSPI_LUT(lut_base));
> +
>         fsl_qspi_lock_lut(q);
>  }
>
> @@ -523,8 +539,15 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
>         case SPINOR_OP_READ_FAST:
>         case SPINOR_OP_READ4_FAST:
>                 return SEQID_READ;
> +       /*
> +        * Spansion & Micron use the same command value 0x65
> +        * Spansion: SPINOR_OP_SPANSION_RDAR, read any register.
> +        * Micron: SPINOR_OP_RD_EVCR,
> +        * read enhanced volatile configuration register.
> +        * case SPINOR_OP_RD_EVCR:
> +        */
>         case SPINOR_OP_SPANSION_RDAR:
> -               return SEQID_RDAR;
> +               return SEQID_RDAR_OR_RD_EVCR;
>         case SPINOR_OP_SPANSION_WRAR:
>                 return SEQID_WRAR;
>         case SPINOR_OP_WREN:
> @@ -550,6 +573,8 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
>                 return SEQID_EN4B;
>         case SPINOR_OP_BRWR:
>                 return SEQID_BRWR;
> +       case SPINOR_OP_WD_EVCR:
> +               return SEQID_WD_EVCR;
>         default:
>                 if (cmd == q->nor[0].erase_opcode)
>                         return SEQID_SE;
> --
> 2.1.0.27.g96db324
>
>
Acked-by: Han xu <han.xu at nxp.com>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/



-- 
Sincerely,

Han XU