[PATCH v3 4/9] mtd: spi-nor: fsl-quadspi: extend support for some special requerment.

[Han Xu]

On Thu, Aug 18, 2016 at 2:37 AM, Yunhui Cui <B56489 at freescale.com> wrote:
> From: Yunhui Cui <yunhui.cui at nxp.com>
>
> Add extra info in LUT table to support some special requerments.
> Spansion S25FS-S family flash need some special operations.
>
> Signed-off-by: Yunhui Cui <yunhui.cui at nxp.com>
> ---
>  drivers/mtd/spi-nor/fsl-quadspi.c | 44 +++++++++++++++++++++++++++++++++++++--
>  include/linux/mtd/spi-nor.h       |  4 ++++
>  2 files changed, 46 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
> index b0a74b8..2521370 100644
> --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> @@ -205,6 +205,9 @@
>  #define SEQID_RDCR             9
>  #define SEQID_EN4B             10
>  #define SEQID_BRWR             11
> +#define SEQID_RDAR             12
> +#define SEQID_WRAR             13
> +
>
>  #define QUADSPI_MIN_IOMAP SZ_4M
>
> @@ -470,6 +473,28 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
>         qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
>                         base + QUADSPI_LUT(lut_base));
>
> +       /*
> +        * Read any device register.
> +        * Used for Spansion S25FS-S family flash only.
> +        */
> +       lut_base = SEQID_RDAR * 4;
> +       qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) |
> +                       LUT1(ADDR, PAD1, ADDR24BIT),
> +                       base + QUADSPI_LUT(lut_base));
> +       qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1),
> +                       base + QUADSPI_LUT(lut_base + 1));
> +
> +       /*
> +        * Write any device register.
> +        * Used for Spansion S25FS-S family flash only.
> +        */
> +       lut_base = SEQID_WRAR * 4;
> +       qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_WRAR) |
> +                       LUT1(ADDR, PAD1, ADDR24BIT),
> +                       base + QUADSPI_LUT(lut_base));
> +       qspi_writel(q, LUT0(FSL_WRITE, PAD1, 1),
> +                       base + QUADSPI_LUT(lut_base + 1));
> +
>         fsl_qspi_lock_lut(q);
>  }
>
> @@ -477,9 +502,15 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
>  static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
>  {
>         switch (cmd) {
> +       case SPINOR_OP_READ4_1_1_4:
>         case SPINOR_OP_READ_1_1_4:
>         case SPINOR_OP_READ_FAST:
> +       case SPINOR_OP_READ4_FAST:
>                 return SEQID_READ;
> +       case SPINOR_OP_SPANSION_RDAR:
> +               return SEQID_RDAR;
> +       case SPINOR_OP_SPANSION_WRAR:
> +               return SEQID_WRAR;
>         case SPINOR_OP_WREN:
>                 return SEQID_WREN;
>         case SPINOR_OP_WRDI:
> @@ -491,6 +522,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
>         case SPINOR_OP_CHIP_ERASE:
>                 return SEQID_CHIP_ERASE;
>         case SPINOR_OP_PP:
> +       case SPINOR_OP_PP_4B:
>                 return SEQID_PP;
>         case SPINOR_OP_RDID:
>                 return SEQID_RDID;
> @@ -830,8 +862,12 @@ static int fsl_qspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
>  {
>         int ret;
>         struct fsl_qspi *q = nor->priv;
> +       u32 to = 0;
> +
> +       if (opcode == SPINOR_OP_SPANSION_RDAR)
> +               memcpy(&to, nor->cmd_buf, 4);
>
> -       ret = fsl_qspi_runcmd(q, opcode, 0, len);
> +       ret = fsl_qspi_runcmd(q, opcode, to, len);
>         if (ret)
>                 return ret;
>
> @@ -843,9 +879,13 @@ static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
>  {
>         struct fsl_qspi *q = nor->priv;
>         int ret;
> +       u32 to = 0;
> +
> +       if (opcode == SPINOR_OP_SPANSION_WRAR)
> +               memcpy(&to, nor->cmd_buf, 4);
>
>         if (!buf) {
> -               ret = fsl_qspi_runcmd(q, opcode, 0, 1);
> +               ret = fsl_qspi_runcmd(q, opcode, to, 1);
>                 if (ret)
>                         return ret;
>
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index c425c7b..db3fe42 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -75,6 +75,10 @@
>  /* Used for Spansion flashes only. */
>  #define SPINOR_OP_BRWR         0x17    /* Bank register write */
>
> +/* Used for Spansion S25FS-S family flash only. */
> +#define SPINOR_OP_SPANSION_RDAR        0x65    /* Read any device register */
> +#define SPINOR_OP_SPANSION_WRAR        0x71    /* Write any device register */
> +
>  /* Used for Micron flashes only. */
>  #define SPINOR_OP_RD_EVCR      0x65    /* Read EVCR register */
>  #define SPINOR_OP_WD_EVCR      0x61    /* Write EVCR register */
> --
> 2.1.0.27.g96db324
>
>
Acked-by: Han xu <han.xu at nxp.com>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/



-- 
Sincerely,

Han XU