[PATCH] mtd: mxc_nand: Set timing for v2 controllers

Sascha Hauer s.hauer at pengutronix.de
Fri Sep 2 05:43:53 PDT 2016


On Mon, Aug 29, 2016 at 10:50:50AM +0200, Boris Brezillon wrote:
> Hi Sascha,
> 
> On Mon, 29 Aug 2016 10:35:58 +0200
> Sascha Hauer <s.hauer at pengutronix.de> wrote:
> 
> > Hi Boris,
> > 
> > On Fri, Aug 26, 2016 at 09:46:53AM +0200, Boris Brezillon wrote:
> > > Hi Sascha,
> > > 
> > > On Tue, 23 Aug 2016 12:34:05 +0200
> > > Sascha Hauer <s.hauer at pengutronix.de> wrote:
> > > 
> > > AFAIR, you should apply the new mode on the NAND side
> > > (ONFI_FEATURE_ADDR_TIMING_MODE) before applying the new config to the
> > > controller.
> > > 
> > > See what's done here [1].
> > > 
> > > Note that on all the NANDs I tested, it seems to work even if you don't
> > > set ONFI_FEATURE_ADDR_TIMING_MODE, but the ONFI Spec describes the
> > > procedure as:  
> > 
> > Indeed, works here without notifying the NAND chip aswell. I wasn't even
> > aware that there is a possibility to notify the NAND chip.
> > 
> > > 
> > > 1/ detect supported modes
> > > 2/ select one
> > > 3/ apply it to the NAND using set(ONFI_FEATURE_ADDR_TIMING_MODE)
> > > 4/ release the CS
> > > 5/ adjust the controller setting to match the new config
> > > 
> > > On a side note, I really think we should handle this timing selection in
> > > the core, and only ask the NAND controller drivers to adapt the
> > > controller settings.  
> > 
> > I agree that the core should do this. Do you already have any thoughts
> > how the API could could look like?
> 
> I already provided a simple implementation a while ago [1]. Not sure it
> handles all the corner cases though.

I just picked up the patch and ported my mxc_nand patch over to it. See
the result on the mailing list.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-mtd mailing list