[v7, 1/3] nand: pl353: Add basic driver for arm pl353 smc nand interface
Jason Gunthorpe
jgunthorpe at obsidianresearch.com
Mon Oct 24 15:59:54 PDT 2016
[cc list trimmed]
On Sun, Oct 23, 2016 at 05:37:42PM +0530, punnaiah choudary kalluri wrote:
> Hi Boris and Jason,
>
> I am doing rework on these patches to accommodate recent changes with
> respect to ooblayout. Also some of the comments that i have received
> from Boris as part of the arasan nand controller upstream patches will
> apply to this driver. So, i will be releasing the next set of patches for this
> driver soon and request your time for reviewing those patches.
I have hacked the v7 patchset enough to work on 4.8 and hacked it some
more to work on my hardware. The driver appears to be in no better
shape than the 3.12 out-of-tree Xilinx release I was using previously..
I've attached the ugly, ugly patch I made, it may save you some time
when preparing v8.
Commentary:
1) nand_chip already includes mtd_info, no reason for a second one in
the pl353_nand_info struct. The standard accessors mtd_to_nand/etc
should be used instead of priv
2) I hacked out all the ECC stuff from the driver since I don't use
it and it was broken.. Obviously some has to come back, but fixing
other things on this list first will make that much easier and better..
3) pl353_nand_write_page_swecc/pl353_nand_read_page_swecc are pure
outdated copies of the core routines and should not exist in a
driver. This needs to be fixed so nand_scan_tail sets them.
This seems to be a side effect of #9 ?
4) The hacky stuff to detect 2 vs 3 address cycle NAND doesn't work,
and doesn't work without ONFI (see patch for possible fix). The
driver should probably use the same scheme the core code uses..
But this is all a problem because of #10
5) The driver assumes alignment of the iomap, needs to use + not |
when constructing the address. (yes, this blows up on my system)
6) Driver unconditionally sets timing to ONFI mode 0 (slow!)
Maybe timing should be common code driven by DT..
7) Driver unconditionally selects a BBT format, and an ECC layout
(neither match what my system uses, but I guess that is a core mtd
issue these days :/)
8) Driver unconditionally forces a chip-delay (wrong for my
system) maybe this should be common code driven by DT..
9) This buisness with pl353_nand_ecc_init and the
special functions to do PL353_NAND_LAST_TRANSFER_LENGTH stuff
is just horrid. I'd expect that is a big NAK.
The driver needs to implement read_buf *properly* so the core
routines can be used instead of trying to 'fix' the call sites
to do the PL353_NAND_LAST_TRANSFER_LENGTH stuff.
10) pl353_nand_cmd_function is a wonky copy of nand_command_lp, maybe
this driver should use cmd_ctrl, or the core code should be
refactored some more..
Jason
diff --git a/drivers/mtd/nand/pl353_nand.c b/drivers/mtd/nand/pl353_nand.c
index 7e3993931f75..63a8d8c008e3 100644
--- a/drivers/mtd/nand/pl353_nand.c
+++ b/drivers/mtd/nand/pl353_nand.c
@@ -26,7 +26,6 @@
#include <linux/mtd/partitions.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
-#include <linux/of_mtd.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
@@ -56,7 +55,6 @@
#define PL353_NAND_ECC_LAST BIT(ECC_LAST_SHIFT) /* Set ECC_Last */
#define PL353_NAND_CLEAR_CS BIT(CLEAR_CS_SHIFT) /* Clear chip select */
-#define ONDIE_ECC_FEATURE_ADDR 0x90
#define PL353_NAND_ECC_BUSY_TIMEOUT (1 * HZ)
#define PL353_NAND_DEV_BUSY_TIMEOUT (1 * HZ)
#define PL353_NAND_LAST_TRANSFER_LENGTH 4
@@ -88,11 +86,9 @@ struct pl353_nand_command_format {
*/
struct pl353_nand_info {
struct nand_chip chip;
- struct mtd_info mtd;
void __iomem *nand_base;
unsigned long end_cmd_pending;
unsigned long end_cmd;
- int ecc_mode;
u8 raddr_cycles;
u8 caddr_cycles;
};
@@ -101,13 +97,13 @@ struct pl353_nand_info {
* The NAND flash operations command format
*/
static const struct pl353_nand_command_format pl353_nand_commands[] = {
- {NAND_CMD_READ0, NAND_CMD_READSTART, 5, PL353_NAND_CMD_PHASE},
+ {NAND_CMD_READ0, NAND_CMD_READSTART, -1, PL353_NAND_CMD_PHASE},
{NAND_CMD_RNDOUT, NAND_CMD_RNDOUTSTART, 2, PL353_NAND_CMD_PHASE},
{NAND_CMD_READID, NAND_CMD_NONE, 1, NAND_CMD_NONE},
{NAND_CMD_STATUS, NAND_CMD_NONE, 0, NAND_CMD_NONE},
- {NAND_CMD_SEQIN, NAND_CMD_PAGEPROG, 5, PL353_NAND_DATA_PHASE},
+ {NAND_CMD_SEQIN, NAND_CMD_PAGEPROG, -1, PL353_NAND_DATA_PHASE},
{NAND_CMD_RNDIN, NAND_CMD_NONE, 2, NAND_CMD_NONE},
- {NAND_CMD_ERASE1, NAND_CMD_ERASE2, 3, PL353_NAND_CMD_PHASE},
+ {NAND_CMD_ERASE1, NAND_CMD_ERASE2, -1, PL353_NAND_CMD_PHASE},
{NAND_CMD_RESET, NAND_CMD_NONE, 0, NAND_CMD_NONE},
{NAND_CMD_PARAM, NAND_CMD_NONE, 1, NAND_CMD_NONE},
{NAND_CMD_GET_FEATURES, NAND_CMD_NONE, 1, NAND_CMD_NONE},
@@ -126,22 +122,58 @@ static const struct pl353_nand_command_format pl353_nand_commands[] = {
};
/* Define default oob placement schemes for large and small page devices */
-static struct nand_ecclayout nand_oob_16 = {
- .eccbytes = 3,
- .eccpos = {0, 1, 2},
- .oobfree = {
- {.offset = 8,
- . length = 8} }
+static int pl353_ooblayout_16_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section != 0)
+ return -ERANGE;
+
+ oobregion->offset = 0;
+ oobregion->length = 3;
+ return 0;
+}
+
+static int pl353_ooblayout_16_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section != 0)
+ return -ERANGE;
+
+ oobregion->offset = 8;
+ oobregion->length = 8;
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops pl353_16_ooblayout_ops = {
+ .ecc = pl353_ooblayout_16_ecc,
+ .free = pl353_ooblayout_16_free,
};
-static struct nand_ecclayout nand_oob_64 = {
- .eccbytes = 12,
- .eccpos = {
- 52, 53, 54, 55, 56, 57,
- 58, 59, 60, 61, 62, 63},
- .oobfree = {
- {.offset = 2,
- .length = 50} }
+static int pl353_ooblayout_64_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section != 0)
+ return -ERANGE;
+
+ oobregion->offset = 52;
+ oobregion->length = 12;
+ return 0;
+}
+
+static int pl353_ooblayout_64_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section != 0)
+ return -ERANGE;
+
+ oobregion->offset = 2;
+ oobregion->length = 50;
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops pl353_64_ooblayout_ops = {
+ .ecc = pl353_ooblayout_64_ecc,
+ .free = pl353_ooblayout_64_free,
};
static unsigned int get_cyc_from_ns(u32 clkrate, u32 ns)
@@ -163,6 +195,7 @@ static unsigned int get_cyc_from_ns(u32 clkrate, u32 ns)
*
* Return: 0 on success or error value on failure
*/
+#if 0
static int pl353_nand_calculate_hwecc(struct mtd_info *mtd,
const u8 *data, u8 *ecc_code)
{
@@ -202,6 +235,7 @@ static int pl353_nand_calculate_hwecc(struct mtd_info *mtd,
}
return 0;
}
+#endif
/**
* onehot - onehot function
@@ -212,10 +246,12 @@ static int pl353_nand_calculate_hwecc(struct mtd_info *mtd,
*
* Return: 1 if it is onehot else 0
*/
+#if 0
static int onehot(unsigned short value)
{
return (value & (value - 1)) == 0;
}
+#endif
/**
* pl353_nand_correct_data - ECC correction function
@@ -230,6 +266,7 @@ static int onehot(unsigned short value)
* 1 if single bit error found and corrected.
* -1 if multiple ECC errors found.
*/
+#if 0
static int pl353_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
unsigned char *read_ecc,
unsigned char *calc_ecc)
@@ -266,6 +303,7 @@ static int pl353_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
return -EBADMSG; /* Uncorrectable error */
}
+#endif
/**
* pl353_nand_read_oob - [REPLACEABLE] the most common OOB data read function
@@ -372,8 +410,8 @@ static int pl353_nand_read_page_raw(struct mtd_info *mtd,
* Return: Always return zero
*/
static int pl353_nand_write_page_raw(struct mtd_info *mtd,
- struct nand_chip *chip,
- const uint8_t *buf, int oob_required)
+ struct nand_chip *chip, const uint8_t *buf,
+ int oob_required, int page)
{
unsigned long data_phase_addr;
uint8_t *p;
@@ -406,6 +444,7 @@ static int pl353_nand_write_page_raw(struct mtd_info *mtd,
*
* Return: Zero on success and error on failure.
*/
+#if 0
static int pl353_nand_write_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip, const uint8_t *buf,
int oob_required)
@@ -459,39 +498,7 @@ static int pl353_nand_write_page_hwecc(struct mtd_info *mtd,
return 0;
}
-
-/**
- * pl353_nand_write_page_swecc - [REPLACEABLE] software ecc based page write
- * function
- * @mtd: Pointer to the mtd info structure
- * @chip: Pointer to the NAND chip info structure
- * @buf: Pointer to the data buffer
- * @oob_required: Caller requires OOB data read to chip->oob_poi
- *
- * Return: Always return zero
- */
-static int pl353_nand_write_page_swecc(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf,
- int oob_required)
-{
- int i, eccsize = chip->ecc.size;
- int eccbytes = chip->ecc.bytes;
- int eccsteps = chip->ecc.steps;
- uint8_t *ecc_calc = chip->buffers->ecccalc;
- const uint8_t *p = buf;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
-
- /* Software ecc calculation */
- for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
- chip->ecc.calculate(mtd, p, &ecc_calc[i]);
-
- for (i = 0; i < chip->ecc.total; i++)
- chip->oob_poi[eccpos[i]] = ecc_calc[i];
-
- chip->ecc.write_page_raw(mtd, chip, buf, 1);
-
- return 0;
-}
+#endif
/**
* pl353_nand_read_page_hwecc - Hardware ECC based page read function
@@ -506,6 +513,7 @@ static int pl353_nand_write_page_swecc(struct mtd_info *mtd,
*
* Return: 0 always and updates ECC operation status in to MTD structure
*/
+#if 0
static int pl353_nand_read_page_hwecc(struct mtd_info *mtd,
struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
@@ -573,52 +581,7 @@ static int pl353_nand_read_page_hwecc(struct mtd_info *mtd,
}
return 0;
}
-
-/**
- * pl353_nand_read_page_swecc - [REPLACEABLE] software ecc based page read
- * function
- * @mtd: Pointer to the mtd info structure
- * @chip: Pointer to the NAND chip info structure
- * @buf: Pointer to the buffer to store read data
- * @oob_required: Caller requires OOB data read to chip->oob_poi
- * @page: Page number to read
- *
- * Return: Always return zero
- */
-static int pl353_nand_read_page_swecc(struct mtd_info *mtd,
- struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page)
-{
- int i, eccsize = chip->ecc.size;
- int eccbytes = chip->ecc.bytes;
- int eccsteps = chip->ecc.steps;
- uint8_t *p = buf;
- uint8_t *ecc_calc = chip->buffers->ecccalc;
- uint8_t *ecc_code = chip->buffers->ecccode;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
-
- chip->ecc.read_page_raw(mtd, chip, buf, page, 1);
-
- for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
- chip->ecc.calculate(mtd, p, &ecc_calc[i]);
-
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
-
- eccsteps = chip->ecc.steps;
- p = buf;
-
- for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- int stat;
-
- stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
- if (stat < 0)
- mtd->ecc_stats.failed++;
- else
- mtd->ecc_stats.corrected += stat;
- }
- return 0;
-}
+#endif
/**
* pl353_nand_select_chip - Select the flash device
@@ -643,10 +606,10 @@ static void pl353_nand_select_chip(struct mtd_info *mtd, int chip)
static void pl353_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
{
- struct nand_chip *chip = mtd->priv;
- const struct pl353_nand_command_format *curr_cmd = NULL;
+ struct nand_chip *chip = mtd_to_nand(mtd);
struct pl353_nand_info *xnand =
- container_of(mtd, struct pl353_nand_info, mtd);
+ container_of(chip, struct pl353_nand_info, chip);
+ const struct pl353_nand_command_format *curr_cmd = NULL;
void __iomem *cmd_addr;
unsigned long cmd_data = 0, end_cmd_valid = 0;
unsigned long cmd_phase_addr, data_phase_addr, end_cmd, i;
@@ -693,33 +656,27 @@ static void pl353_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
else
end_cmd = curr_cmd->end_cmd;
- if ((command == NAND_CMD_READ0) && (command == NAND_CMD_SEQIN))
+ if ((command == NAND_CMD_READ0) || (command == NAND_CMD_SEQIN))
addrcycles = xnand->raddr_cycles + xnand->caddr_cycles;
else if (command == NAND_CMD_ERASE1)
addrcycles = xnand->raddr_cycles;
else
addrcycles = curr_cmd->addr_cycles;
- cmd_phase_addr = (unsigned long __force)xnand->nand_base |
- (addrcycles << ADDR_CYCLES_SHIFT) |
- (end_cmd_valid << END_CMD_VALID_SHIFT) |
- (COMMAND_PHASE) |
- (end_cmd << END_CMD_SHIFT) |
- (curr_cmd->start_cmd << START_CMD_SHIFT);
-
- cmd_addr = (void __iomem * __force)cmd_phase_addr;
+ cmd_addr =
+ xnand->nand_base + ((addrcycles << ADDR_CYCLES_SHIFT) |
+ (end_cmd_valid << END_CMD_VALID_SHIFT) |
+ (COMMAND_PHASE) | (end_cmd << END_CMD_SHIFT) |
+ (curr_cmd->start_cmd << START_CMD_SHIFT));
/* Get the data phase address */
end_cmd_valid = 0;
- data_phase_addr = (unsigned long __force)xnand->nand_base |
- (0x0 << CLEAR_CS_SHIFT) |
- (end_cmd_valid << END_CMD_VALID_SHIFT) |
- (DATA_PHASE) |
- (end_cmd << END_CMD_SHIFT) |
- (0x0 << ECC_LAST_SHIFT);
-
- chip->IO_ADDR_R = (void __iomem * __force)data_phase_addr;
+ chip->IO_ADDR_R =
+ xnand->nand_base + ((0x0 << CLEAR_CS_SHIFT) |
+ (end_cmd_valid << END_CMD_VALID_SHIFT) |
+ (DATA_PHASE) | (end_cmd << END_CMD_SHIFT) |
+ (0x0 << ECC_LAST_SHIFT));
chip->IO_ADDR_W = chip->IO_ADDR_R;
/* Command phase AXI write */
@@ -779,6 +736,7 @@ static void pl353_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
if (time_after_eq(jiffies, timeout))
pr_err("%s timed out\n", __func__);
+
return;
}
}
@@ -791,8 +749,8 @@ static void pl353_nand_cmd_function(struct mtd_info *mtd, unsigned int command,
*/
static void pl353_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
+ struct nand_chip *chip = mtd_to_nand(mtd);
int i;
- struct nand_chip *chip = mtd->priv;
unsigned long *ptr = (unsigned long *)buf;
len >>= 2;
@@ -809,8 +767,8 @@ static void pl353_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
static void pl353_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
int len)
{
+ struct nand_chip *chip = mtd_to_nand(mtd);
int i;
- struct nand_chip *chip = mtd->priv;
unsigned long *ptr = (unsigned long *)buf;
len >>= 2;
@@ -843,11 +801,12 @@ static int pl353_nand_device_ready(struct mtd_info *mtd)
*
* Return: Zero on success and error on failure.
*/
+#if 0
static int pl353_nand_ecc_init(struct mtd_info *mtd)
{
- struct nand_chip *nand_chip = mtd->priv;
+ struct nand_chip *chip = mtd_to_nand(mtd);
struct pl353_nand_info *xnand =
- container_of(mtd, struct pl353_nand_info, mtd);
+ container_of(chip, struct pl353_nand_info, chip);
nand_chip->ecc.read_oob = pl353_nand_read_oob;
nand_chip->ecc.write_oob = pl353_nand_write_oob;
@@ -868,7 +827,7 @@ static int pl353_nand_ecc_init(struct mtd_info *mtd)
nand_chip->ecc.hwctl = NULL;
nand_chip->ecc.read_page = pl353_nand_read_page_hwecc;
nand_chip->ecc.size = PL353_NAND_ECC_SIZE;
- nand_chip->ecc.write_page = pl353_nand_write_page_hwecc;
+// nand_chip->ecc.write_page = pl353_nand_write_page_hwecc;
pl353_smc_set_ecc_pg_size(mtd->dev.parent, mtd->writesize);
pl353_smc_set_ecc_mode(mtd->dev.parent, PL353_SMC_ECCMODE_APB);
/* Hardware ECC generates 3 bytes ECC code for each 512 bytes */
@@ -904,6 +863,7 @@ static int pl353_nand_ecc_init(struct mtd_info *mtd)
return 0;
}
+#endif
static int pl353_nand_init_timing(struct device *dev, int mode)
{
@@ -924,7 +884,7 @@ static int pl353_nand_init_timing(struct device *dev, int mode)
t_ar = get_cyc_from_ns(clkrate, time->tAR_min / 1000);
t_rr = get_cyc_from_ns(clkrate, time->tRR_min / 1000);
- pl353_smc_set_cycles(dev, t_rc, t_wc, t_rea, t_wp, t_clr, t_ar, t_rr);
+// pl353_smc_set_cycles(dev, t_rc, t_wc, t_rea, t_wp, t_clr, t_ar, t_rr);
return 0;
}
@@ -943,28 +903,24 @@ static int pl353_nand_probe(struct platform_device *pdev)
struct mtd_info *mtd;
struct nand_chip *nand_chip;
struct resource *res;
- struct mtd_part_parser_data ppdata;
xnand = devm_kzalloc(&pdev->dev, sizeof(*xnand), GFP_KERNEL);
if (!xnand)
return -ENOMEM;
+ /* Setup the basic MTD stuff */
+ mtd = nand_to_mtd(&xnand->chip);
+ nand_chip = &xnand->chip;
+ mtd->dev.parent = pdev->dev.parent;
+ mtd->name = PL353_NAND_DRIVER_NAME;
+ nand_set_flash_node(nand_chip, pdev->dev.of_node);
+
/* Map physical address of NAND flash */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
xnand->nand_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(xnand->nand_base))
return PTR_ERR(xnand->nand_base);
- /* Link the private data with the MTD structure */
- mtd = &xnand->mtd;
- nand_chip = &xnand->chip;
-
- nand_chip->priv = xnand;
- mtd->priv = nand_chip;
- mtd->dev.parent = pdev->dev.parent;
- mtd->owner = THIS_MODULE;
- mtd->name = PL353_NAND_DRIVER_NAME;
-
/* Set address of NAND IO lines */
nand_chip->IO_ADDR_R = xnand->nand_base;
nand_chip->IO_ADDR_W = xnand->nand_base;
@@ -973,42 +929,46 @@ static int pl353_nand_probe(struct platform_device *pdev)
nand_chip->cmdfunc = pl353_nand_cmd_function;
nand_chip->dev_ready = pl353_nand_device_ready;
nand_chip->select_chip = pl353_nand_select_chip;
-
- /* If we don't set this delay driver sets 20us by default */
- nand_chip->chip_delay = 30;
-
- /* Buffer read/write routines */
nand_chip->read_buf = pl353_nand_read_buf;
nand_chip->write_buf = pl353_nand_write_buf;
-
- /* Set the device option and flash width */
nand_chip->options = NAND_BUSWIDTH_AUTO;
- nand_chip->bbt_options = NAND_BBT_USE_FLASH;
+// nand_chip->bbt_options = NAND_BBT_USE_FLASH;
+
+ /* If we don't set this delay driver sets 20us by default */
+ nand_chip->chip_delay = 30;
+ // FIXME: from dt
+ nand_chip->chip_delay = 50;
platform_set_drvdata(pdev, xnand);
if (pl353_nand_init_timing(pdev->dev.parent, 0))
return -ENOTSUPP;
+
/* First scan to find the device and get the page size */
if (nand_scan_ident(mtd, 1, NULL)) {
dev_err(&pdev->dev, "nand_scan_ident for NAND failed\n");
return -ENXIO;
}
- xnand->ecc_mode = of_get_nand_ecc_mode(pdev->dev.of_node);
- if (xnand->ecc_mode < 0)
- xnand->ecc_mode = NAND_ECC_HW;
-
if (nand_chip->onfi_version) {
xnand->raddr_cycles = nand_chip->onfi_params.addr_cycles & 0xF;
xnand->caddr_cycles =
(nand_chip->onfi_params.addr_cycles >> 4) & 0xF;
} else {
- /*For non-ONFI devices, configuring the address cyles as 5 */
- xnand->raddr_cycles = xnand->caddr_cycles = 5;
+ /* For non-ONFI devices, configure the address cyles based on
+ * the device size */
+ xnand->caddr_cycles = 2;
+ if (nand_chip->chipsize > (128 << 20))
+ xnand->raddr_cycles = 3;
+ else
+ xnand->raddr_cycles = 2;
}
- if (pl353_nand_ecc_init(mtd))
- return -ENOTSUPP;
+ nand_chip->ecc.read_oob = pl353_nand_read_oob;
+ nand_chip->ecc.write_oob = pl353_nand_write_oob;
+ nand_chip->ecc.read_page_raw = pl353_nand_read_page_raw;
+ nand_chip->ecc.write_page_raw = pl353_nand_write_page_raw;
+/* if (pl353_nand_ecc_init(mtd))
+ return -ENOTSUPP;*/
if (nand_chip->options & NAND_BUSWIDTH_16)
pl353_smc_set_buswidth(pdev->dev.parent,
@@ -1021,9 +981,7 @@ static int pl353_nand_probe(struct platform_device *pdev)
return -ENXIO;
}
- ppdata.of_node = pdev->dev.of_node;
-
- mtd_device_parse_register(&xnand->mtd, NULL, &ppdata, NULL, 0);
+ mtd_device_parse_register(mtd, NULL, NULL, NULL, 0);
return 0;
}
@@ -1042,7 +1000,7 @@ static int pl353_nand_remove(struct platform_device *pdev)
struct pl353_nand_info *xnand = platform_get_drvdata(pdev);
/* Release resources, unregister device */
- nand_release(&xnand->mtd);
+ nand_release(nand_to_mtd(&xnand->chip));
return 0;
}
More information about the linux-mtd
mailing list