[PATCH v3 1/9] mtd: spi-nor: improve macronix_quad_enable()

[Marek Vasut]

On 10/24/2016 06:34 PM, Cyrille Pitchen wrote:
> The patch checks whether the Quad Enable bit is already set in the Status
> Register. If so, the function exits immediately with a successful return
> code. Otherwise, a message is now printed telling we're setting the
> non-volatile bit.
> 
> Signed-off-by: Cyrille Pitchen <cyrille.pitchen at atmel.com>
> Reviewed-by: Jagan Teki <jagan at openedev.com>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d0fc165d7d66..5c87b2d99507 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -1211,6 +1211,11 @@ static int macronix_quad_enable(struct spi_nor *nor)
>  	val = read_sr(nor);
>  	if (val < 0)
>  		return val;
> +	if (val & SR_QUAD_EN_MX)
> +		return 0;
> +
> +	/* Update the Quad Enable bit. */
> +	dev_info(nor->dev, "setting Macronix Quad Enable (non-volatile) bit\n");

Should probably be dev_dbg(), since this is just churn in the kernel
log. The user doesn't care and the developer can just up the debug level
or add his own printk .

>  	write_enable(nor);
>  
>  	write_sr(nor, val | SR_QUAD_EN_MX);
> 


-- 
Best regards,
Marek Vasut