[PATCH v3 1/3] mtd: s3c2410: make ecc mode configurable via platform data

[Boris Brezillon]

Hi Krzysztof,

On Fri, 21 Oct 2016 21:27:10 +0300
Krzysztof Kozlowski <krzk at kernel.org> wrote:

> On Thu, Oct 20, 2016 at 07:42:44PM -0200, Sergio Prado wrote:
> > Removing CONFIG_MTD_NAND_S3C2410_HWECC option and adding a ecc_mode
> > field in the drivers's platform data structure so it can be selectable
> > via platform data.
> > 
> > Also setting this field to NAND_ECC_SOFT in all boards using this
> > driver since none of them had CONFIG_MTD_NAND_S3C2410_HWECC enabled.
> > 
> > Signed-off-by: Sergio Prado <sergio.prado at e-labworks.com>
> > ---
> >  arch/arm/mach-s3c24xx/common-smdk.c            |   1 +
> >  arch/arm/mach-s3c24xx/mach-anubis.c            |   1 +
> >  arch/arm/mach-s3c24xx/mach-at2440evb.c         |   1 +
> >  arch/arm/mach-s3c24xx/mach-bast.c              |   1 +
> >  arch/arm/mach-s3c24xx/mach-gta02.c             |   1 +
> >  arch/arm/mach-s3c24xx/mach-jive.c              |   1 +
> >  arch/arm/mach-s3c24xx/mach-mini2440.c          |   1 +
> >  arch/arm/mach-s3c24xx/mach-osiris.c            |   1 +
> >  arch/arm/mach-s3c24xx/mach-qt2410.c            |   1 +
> >  arch/arm/mach-s3c24xx/mach-rx1950.c            |   1 +
> >  arch/arm/mach-s3c24xx/mach-rx3715.c            |   1 +
> >  arch/arm/mach-s3c24xx/mach-vstms.c             |   1 +
> >  arch/arm/mach-s3c64xx/mach-hmt.c               |   1 +
> >  arch/arm/mach-s3c64xx/mach-mini6410.c          |   1 +
> >  arch/arm/mach-s3c64xx/mach-real6410.c          |   1 +
> >  drivers/mtd/nand/Kconfig                       |   9 --
> >  drivers/mtd/nand/s3c2410.c                     | 119 +++++++++++++------------
> >  include/linux/platform_data/mtd-nand-s3c2410.h |   6 +-
> >  18 files changed, 79 insertions(+), 70 deletions(-)
> >  
> 
> I acked this twice (v1 and v2)... and still you are ignoring them. I am
> sorry, I am not gonna to ack this third time!
> 
> For v2 I acked also other patches but it it is not there as well...

I'll collect your acks (and Rob ones) when applying the patches. BTW,
how should I proceed with patch 1? Do you want an topic branch
containing this patch?

Regards,

Boris