[PATCH 2/4] mfd: ptxpmb-ext-cpld: Add documentation for PTXPMB extended CPLD

Pantelis Antoniou pantelis.antoniou at konsulko.com
Mon Oct 17 12:08:54 PDT 2016


Hi Rob,

> On Oct 10, 2016, at 23:10 , Rob Herring <robh at kernel.org> wrote:
> 
> On Fri, Oct 07, 2016 at 06:19:32PM +0300, Pantelis Antoniou wrote:
>> From: Georgi Vlaev <gvlaev at juniper.net>
>> 
>> Add DT bindings document for the PTXPMB extended CPLD device.
>> 
>> Signed-off-by: Georgi Vlaev <gvlaev at juniper.net>
>> [Ported from Juniper kernel]
>> Signed-off-by: Pantelis Antoniou <pantelis.antoniou at konsulko.com>
>> ---
>> .../bindings/mfd/jnx-ptxpmb-ext-cpld.txt           | 35 ++++++++++++++++++++++
>> 1 file changed, 35 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/mfd/jnx-ptxpmb-ext-cpld.txt
>> 
>> diff --git a/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-ext-cpld.txt b/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-ext-cpld.txt
>> new file mode 100644
>> index 0000000..098a548a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/jnx-ptxpmb-ext-cpld.txt
>> @@ -0,0 +1,35 @@
>> +* Device tree bindings for Juniper's PTXPMB Extended CPLD FPGA MFD driver
>> +
>> +The device supports a gpio block which is described in the
>> +jnx-gpio-ptxpmb-ext-cpld document.
>> +
>> +Required properties:
>> +
>> +- compatible:		"jnx,ptxpmb-ext-cpld"
>> +
>> +- reg:			contains offset/length value for device state control
>> +			registers space.
>> +
>> +Optional properties:
>> +
>> +- interrupts:		The interrupt line(s) the /IRQ signal(s) for the device is
>> +			connected to.
>> +
>> +- interrupt-parent:	The parent interrupt controller.
>> +
>> +Example:
>> +
>> +ext-cpld at 1,0 {
>> +	compatible = "jnx,ptxpmb-ext-cpld";
>> +	reg = <0x1 0 0x1000>;
> 
> What's the bus type here? Unit address is probably wrong.
> 

localbus on a gpmc memory controller.

>> +	interrupt-parent = <&mpic>;
>> +	interrupts = <7 2>, <8 2>;
>> +
>> +	gpio_ext_cpld: cpld-ext-gpio {
>> +		compatible = "jnx,gpio-ptxpmb-ext-cpld";
>> +		#gpio-cells = <2>;
>> +		#interrupt-cells = <2>;
>> +		gpio-controller;
>> +		interrupt-controller;
>> +	};
>> +};
>> -- 
>> 1.9.1




More information about the linux-mtd mailing list