[PATCH 10/10] mtd: ngpmb_nvram: Add bindings for Juniper's ngpmb NVRAM

[Pantelis Antoniou]

From: Georgi Vlaev <gvlaev at juniper.net>

Add device tree binging document for the ngpmb NVRAM device.

Signed-off-by: Georgi Vlaev <gvlaev at juniper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou at konsulko.com>
---
 .../devicetree/bindings/mtd/ngpmb-nvram.txt        | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/ngpmb-nvram.txt

diff --git a/Documentation/devicetree/bindings/mtd/ngpmb-nvram.txt b/Documentation/devicetree/bindings/mtd/ngpmb-nvram.txt
new file mode 100644
index 0000000..297ad0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ngpmb-nvram.txt
@@ -0,0 +1,22 @@
+Non Volatile RAM device on a Juniper NG PMB FPGA
+
+These devices are found in the PTX series of Juniper routers.
+
+Required properties:
+- compatible : must be "jnx,ngpmb-nvram"
+
+Optional properties:
+- reg : memory address for the RAM, note that this is not
+required since usually the device is a subdevice of the SAM MFD
+driver which fills in the register fields.
+
+For the rest of the properties, see mtd-physmap.txt.
+
+The device tree may optionally contain sub-nodes describing partitions of the
+address space. See partition.txt for more detail.
+
+Example:
+
+ngpmb_nvram {
+	compatible = "jnx,ngpmb-nvram";
+};
-- 
1.9.1