[PATCH 18/39] mtd: nand: denali: move denali_read_page_raw() above denali_read_page()
Boris Brezillon
boris.brezillon at free-electrons.com
Sun Nov 27 08:10:08 PST 2016
On Sun, 27 Nov 2016 03:06:04 +0900
Masahiro Yamada <yamada.masahiro at socionext.com> wrote:
> This will be needed in the next commit to call denali_read_page_raw()
> from denali_read_page().
Please squash this change into patch 19. It's clearly useless to
dissociate them.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> ---
>
> drivers/mtd/nand/denali.c | 76 +++++++++++++++++++++++------------------------
> 1 file changed, 38 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
> index c101e7f..f035dac 100644
> --- a/drivers/mtd/nand/denali.c
> +++ b/drivers/mtd/nand/denali.c
> @@ -1118,6 +1118,44 @@ static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
> return 0;
> }
>
> +static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
> + u8 *buf, int oob_required, int page)
> +{
> + struct denali_nand_info *denali = mtd_to_denali(mtd);
> + dma_addr_t addr = denali->buf.dma_buf;
> + size_t size = mtd->writesize + mtd->oobsize;
> + u32 irq_mask = INTR_STATUS__DMA_CMD_COMP;
> +
> + if (page != denali->page) {
> + dev_err(denali->dev,
> + "IN %s: page %d is not equal to denali->page %d",
> + __func__, page, denali->page);
> + BUG();
> + }
> +
> + setup_ecc_for_xfer(denali, false, oob_required ? true : false);
> + denali_enable_dma(denali, true);
> +
> + dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
> +
> + clear_interrupts(denali);
> + denali_setup_dma(denali, DENALI_READ);
> +
> + /* wait for operation to complete */
> + wait_for_irq(denali, irq_mask);
> +
> + dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
> +
> + denali_enable_dma(denali, false);
> +
> + memcpy(buf, denali->buf.buf, mtd->writesize);
> + if (oob_required)
> + memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize,
> + mtd->oobsize);
> +
> + return 0;
> +}
> +
> static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> u8 *buf, int oob_required, int page)
> {
> @@ -1182,44 +1220,6 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> return max_bitflips;
> }
>
> -static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
> - u8 *buf, int oob_required, int page)
> -{
> - struct denali_nand_info *denali = mtd_to_denali(mtd);
> - dma_addr_t addr = denali->buf.dma_buf;
> - size_t size = mtd->writesize + mtd->oobsize;
> - u32 irq_mask = INTR_STATUS__DMA_CMD_COMP;
> -
> - if (page != denali->page) {
> - dev_err(denali->dev,
> - "IN %s: page %d is not equal to denali->page %d",
> - __func__, page, denali->page);
> - BUG();
> - }
> -
> - setup_ecc_for_xfer(denali, false, oob_required ? true : false);
> - denali_enable_dma(denali, true);
> -
> - dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
> -
> - clear_interrupts(denali);
> - denali_setup_dma(denali, DENALI_READ);
> -
> - /* wait for operation to complete */
> - wait_for_irq(denali, irq_mask);
> -
> - dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
> -
> - denali_enable_dma(denali, false);
> -
> - memcpy(buf, denali->buf.buf, mtd->writesize);
> - if (oob_required)
> - memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize,
> - mtd->oobsize);
> -
> - return 0;
> -}
> -
> static u8 denali_read_byte(struct mtd_info *mtd)
> {
> struct denali_nand_info *denali = mtd_to_denali(mtd);
More information about the linux-mtd
mailing list