[PATCH v5 5/5] mtd: nand: set max_bb_per_die and blocks_per_die for ONFI compliant chips

Zach Brown zach.brown at ni.com
Mon Nov 7 08:36:13 PST 2016


ONFI compliant chips contain the values for the max_bb_per_die and
blocks_per_die fields in the parameter page. When the ONFI paged is
retrieved/parsed the chip's fields are set by the corresponding fields
in the param page.

Signed-off-by: Zach Brown <zach.brown at ni.com>
Acked-by: Boris Brezillon <boris.brezillon at free-electron.com>
---
 drivers/mtd/nand/nand_base.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 193a6b7..fb5b585 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3599,6 +3599,9 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
 	chip->bits_per_cell = p->bits_per_cell;
 
+	chip->max_bb_per_die = le16_to_cpu(p->bb_per_lun);
+	chip->blocks_per_die = le32_to_cpu(p->blocks_per_lun);
+
 	if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS)
 		*busw = NAND_BUSWIDTH_16;
 	else
-- 
2.7.4




More information about the linux-mtd mailing list