[PATCH 13/15] mtd: nand: samsung: retrieve ECC requirements from extended ID
Valdis.Kletnieks at vt.edu
Valdis.Kletnieks at vt.edu
Sun May 29 17:20:35 PDT 2016
On Fri, 27 May 2016 14:54:59 +0200, Boris Brezillon said:
> From: Hans de Goede <hdegoede at redhat.com>
>
> On some nand controllers with hw-ecc the controller code wants to know
> the ecc strength and size and having these as 0, 0 is not accepted.
>
> Specifying these in devicetree is possible but undesirable as the nand
> may be different in different production runs of the same board, so it
> is better to get this info from the nand id where possible.
>
> This commit adds code to read the ecc strength and size from the nand
> for Samsung extended-id nands. This code is based on the info for the 5th
> id byte in the datasheets for the following Samsung nands: K9GAG08U0E,
> K9GAG08U0F, K9GAG08X0D, K9GBG08U0A, K9GBG08U0B. These all use these bits
> in the exact same way.
Is this correct for all Samsung nand devices supported by this driver?
(If this driver only covers those 5 specific parts, it's OK. If there's
others, more research is needed....)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 848 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20160529/20204169/attachment.sig>
More information about the linux-mtd
mailing list