[PATCH 08/15] mtd: nand: move hynix specific initialization in nand_hynix.c
Boris Brezillon
boris.brezillon at free-electrons.com
Fri May 27 05:54:54 PDT 2016
Moving Hynix specific initialization into nand_hynix.c. This is part
of the "separate vendor specific code from core" cleanup process.
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/nand_base.c | 108 ++++++++++--------------------------------
drivers/mtd/nand/nand_hynix.c | 92 +++++++++++++++++++++++++++++++++++
drivers/mtd/nand/nand_ids.c | 3 +-
4 files changed, 121 insertions(+), 83 deletions(-)
create mode 100644 drivers/mtd/nand/nand_hynix.c
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 55a55d3..d79338f 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -58,4 +58,5 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
+nand-objs += nand_hynix.o
nand-objs += nand_samsung.o
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index dda350a..ce0ea01 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3590,85 +3590,32 @@ static void nand_decode_ext_id(struct nand_chip *chip)
/* The 4th id byte is the important one */
extid = id_data[3];
+ /* Calc pagesize */
+ mtd->writesize = 1024 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->writesize >> 9);
+ extid >>= 2;
+ /* Calc blocksize. Blocksize is multiples of 64KiB */
+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
+ extid >>= 2;
+ /* Get buswidth information */
+ if (extid & 0x1)
+ chip->options |= NAND_BUSWIDTH_16;
+
/*
- * Field definitions are in the following datasheets:
- * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
- * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22)
- *
- * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
- * ID to decide what to do.
+ * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
+ * 512B page. For Toshiba SLC, we decode the 5th/6th byte as
+ * follows:
+ * - ID byte 6, bits[2:0]: 100b -> 43nm, 101b -> 32nm,
+ * 110b -> 24nm
+ * - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC
*/
- if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
- !nand_is_slc(chip)) {
- unsigned int tmp;
-
- /* Calc pagesize */
- mtd->writesize = 2048 << (extid & 0x03);
- extid >>= 2;
- /* Calc oobsize */
- switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
- case 0:
- mtd->oobsize = 128;
- break;
- case 1:
- mtd->oobsize = 224;
- break;
- case 2:
- mtd->oobsize = 448;
- break;
- case 3:
- mtd->oobsize = 64;
- break;
- case 4:
- mtd->oobsize = 32;
- break;
- case 5:
- mtd->oobsize = 16;
- break;
- default:
- mtd->oobsize = 640;
- break;
- }
- extid >>= 2;
- /* Calc blocksize */
- tmp = ((extid >> 1) & 0x04) | (extid & 0x03);
- if (tmp < 0x03)
- mtd->erasesize = (128 * 1024) << tmp;
- else if (tmp == 0x03)
- mtd->erasesize = 768 * 1024;
- else
- mtd->erasesize = (64 * 1024) << tmp;
- } else {
- /* Calc pagesize */
- mtd->writesize = 1024 << (extid & 0x03);
- extid >>= 2;
- /* Calc oobsize */
- mtd->oobsize = (8 << (extid & 0x01)) *
- (mtd->writesize >> 9);
- extid >>= 2;
- /* Calc blocksize. Blocksize is multiples of 64KiB */
- mtd->erasesize = (64 * 1024) << (extid & 0x03);
- extid >>= 2;
- /* Get buswidth information */
- if (extid & 0x1)
- chip->options |= NAND_BUSWIDTH_16;
-
- /*
- * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
- * 512B page. For Toshiba SLC, we decode the 5th/6th byte as
- * follows:
- * - ID byte 6, bits[2:0]: 100b -> 43nm, 101b -> 32nm,
- * 110b -> 24nm
- * - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC
- */
- if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
- nand_is_slc(chip) &&
- (id_data[5] & 0x7) == 0x6 /* 24nm */ &&
- !(id_data[4] & 0x80) /* !BENAND */) {
- mtd->oobsize = 32 * mtd->writesize >> 9;
- }
-
- }
+ if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
+ nand_is_slc(chip) &&
+ (id_data[5] & 0x7) == 0x6 /* 24nm */ &&
+ !(id_data[4] & 0x80) /* !BENAND */)
+ mtd->oobsize = 32 * mtd->writesize >> 9;
}
/*
@@ -3726,11 +3673,8 @@ static void nand_decode_bbm_options(struct nand_chip *chip)
* Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
* AMD/Spansion, and Macronix. All others scan only the first page.
*/
- if (!nand_is_slc(chip) && maf_id == NAND_MFR_HYNIX)
- chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
- else if ((nand_is_slc(chip) &&
- (maf_id == NAND_MFR_HYNIX ||
- maf_id == NAND_MFR_TOSHIBA ||
+ if ((nand_is_slc(chip) &&
+ (maf_id == NAND_MFR_TOSHIBA ||
maf_id == NAND_MFR_AMD ||
maf_id == NAND_MFR_MACRONIX)) ||
(mtd->writesize == 2048 &&
diff --git a/drivers/mtd/nand/nand_hynix.c b/drivers/mtd/nand/nand_hynix.c
new file mode 100644
index 0000000..3a4e1a4
--- /dev/null
+++ b/drivers/mtd/nand/nand_hynix.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2013 Boris Brezillon <boris.brezillon at free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mtd/nand.h>
+
+static int hynix_nand_decode_id(struct nand_chip *chip)
+{
+ struct mtd_info *mtd = nand_to_mtd(chip);
+
+ /*
+ * The NAND is compatible with the JEDEC or ONFI standard, we already
+ * have all the information we could retrieve from the extended ID.
+ */
+ if (chip->onfi_version || chip->jedec_version)
+ return 0;
+
+ /* Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) */
+ if (chip->id.len == 6 && !nand_is_slc(chip)) {
+ u8 tmp, extid = chip->id.data[3] >> 2;
+
+ /* Adjust pagesize */
+ mtd->writesize <<= 1;
+
+ /* Fix oobsize */
+ switch (((extid >> 2) & 0x4) | (extid & 0x3)) {
+ case 0:
+ mtd->oobsize = 128;
+ break;
+ case 1:
+ mtd->oobsize = 224;
+ break;
+ case 2:
+ mtd->oobsize = 448;
+ break;
+ case 3:
+ mtd->oobsize = 64;
+ break;
+ case 4:
+ mtd->oobsize = 32;
+ break;
+ case 5:
+ mtd->oobsize = 16;
+ break;
+ default:
+ mtd->oobsize = 640;
+ break;
+ }
+
+ /* Fix blocksize */
+ extid >>= 2;
+ tmp = ((extid >> 1) & 0x04) | (extid & 0x03);
+ if (tmp < 0x03)
+ mtd->erasesize = (128 * 1024) << tmp;
+ else if (tmp == 0x03)
+ mtd->erasesize = 768 * 1024;
+ else
+ mtd->erasesize = (64 * 1024) << tmp;
+ }
+
+ return 0;
+}
+
+static int hynix_nand_init(struct nand_chip *chip)
+{
+ int ret;
+
+ ret = hynix_nand_decode_id(chip);
+ if (ret)
+ return ret;
+
+ if (!nand_is_slc(chip))
+ chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+ else
+ chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+
+ return 0;
+}
+
+const struct nand_manufacturer_ops hynix_nand_manuf_ops = {
+ .init = hynix_nand_init,
+};
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index 5d2bef5..7bf93b8 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -167,6 +167,7 @@ struct nand_flash_dev nand_flash_ids[] = {
/* Manufacturer IDs */
extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
+extern const struct nand_manufacturer_ops hynix_nand_manuf_ops;
struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_TOSHIBA, "Toshiba"},
@@ -175,7 +176,7 @@ struct nand_manufacturers nand_manuf_ids[] = {
{NAND_MFR_NATIONAL, "National"},
{NAND_MFR_RENESAS, "Renesas"},
{NAND_MFR_STMICRO, "ST Micro"},
- {NAND_MFR_HYNIX, "Hynix"},
+ {NAND_MFR_HYNIX, "Hynix", &hynix_nand_manuf_ops},
{NAND_MFR_MICRON, "Micron"},
{NAND_MFR_AMD, "AMD/Spansion"},
{NAND_MFR_MACRONIX, "Macronix"},
--
2.7.4
More information about the linux-mtd
mailing list