UBIFS assert when rebooting a read only ubifs when it's been remounted r/w
Martin Townsend
mtownsend1973 at gmail.com
Tue May 24 07:12:13 PDT 2016
On Tue, May 24, 2016 at 2:42 PM, Richard Weinberger <richard at nod.at> wrote:
> Am 24.05.2016 um 15:23 schrieb Martin Townsend:
>> On Tue, May 24, 2016 at 1:26 PM, Richard Weinberger <richard at nod.at> wrote:
>>> Am 24.05.2016 um 12:37 schrieb Martin Townsend:
>>>> Here's a link to the image
>>>> https://file.io/0s7OA9
>>>
>>> 404 :-(
>>>
>>>> I've just tried on another board and can still get the same assert so
>>>> it's not just a one off. I also saw this warning whilst formatting
>>>> this board. I tried reflashing again until I did not get the warning
>>>> below but still saw the assert so I don't think they are related.
>>>> ubiformat: mtd12 (nand), size 533725184 bytes (509.0 MiB), 4072
>>>> eraseblocks of 131072 bytes (128.0 KiB), min. I/O size 2048 bytes
>>>> libscan: scanning eraseblock 4071 -- 100 % complete
>>>> ubiformat: 4070 eraseblocks are supposedly empty
>>>> ubiformat: 2 bad eraseblocks found, numbers: 1324, 1640
>>>> ubiformat: flashing eraseblock 191 -- 17 % complete [ 51.525672]
>>>> ------------[ cut here ]------------
>>>> [ 80.185567] WARNING: CPU: 0 PID: 896 at
>>>> /home/poweroasis/bia/build/am43-controller-aquila/tmp/work-shared/am43-controller-aquila/kernel-source/drivers/mtd/nand/nand_base.c:928
>>>> nand_wait+0x150/0x174()
>>>
>>> Not good. Please verify.
>>> See the comment above that WARN_ON().
>>>
>>
>> Try this one:
>> http://gofile.io/?id=P2z2Zd
>
> Again file not found. WTF?
>
aaarrgh, sums my day up so far, try this one, I've just tested and at
least it started downloading the file.
http://tempsend.com/32760A445F
> Thanks,
> //richard
More information about the linux-mtd
mailing list