[PATCH 1/2] Revert "mtd: atmel_nand: Support variable RB_EDGE interrupts"
Yang, Wenyou
Wenyou.Yang at atmel.com
Tue May 10 01:59:44 PDT 2016
> -----Original Message-----
> From: Boris Brezillon [mailto:boris.brezillon at free-electrons.com]
> Sent: 2016年5月10日 16:56
> To: Yang, Wenyou <Wenyou.Yang at atmel.com>; Romain Izard
> <romain.izard.pro at gmail.com>
> Cc: Brian Norris <computersforpeace at gmail.com>; David Woodhouse
> <dwmw2 at infradead.org>; Rob Herring <robh+dt at kernel.org>; Pawel Moll
> <pawel.moll at arm.com>; Mark Brown <broonie at kernel.org>; Ian Campbell
> <ijc+devicetree at hellion.org.uk>; Kumar Gala <galak at codeaurora.org>;
> devicetree at vger.kernel.org; Russell King <linux at arm.linux.org.uk>; Josh Wu
> <rainyfeeling at outlook.com>; Ferre, Nicolas <Nicolas.FERRE at atmel.com>;
> linux-kernel at vger.kernel.org; Alexandre Belloni <alexandre.belloni at free-
> electrons.com>; linux-mtd at lists.infradead.org; Jean-Christophe Plagniol-Villard
> <plagnioj at jcrosoft.com>; linux-arm-kernel at lists.infradead.org
> Subject: Re: [PATCH 1/2] Revert "mtd: atmel_nand: Support variable RB_EDGE
> interrupts"
>
> Hi Wenyou,
>
> Can you add NAND maintainers/reviewers in Cc next time. And since you revert a
> commit, you should also add the commit author in the loop.
>
> On Mon, 9 May 2016 14:51:18 +0800
> Wenyou Yang <wenyou.yang at atmel.com> wrote:
>
> > This reverts commit 5ddc7bd43ccc ("mtd: atmel_nand: Support variable
> > RB_EDGE interrupts")
> >
> > Because for current SoCs, the RB_EDGE3(i.e. bit 27) of HSMC_SR
> > register does not exist, the RB_EDGE0 (i.e. bit 24) is the ready/busy
> > line edge status bit. It is a datasheet bug.
>
> Romain, I thought you had a real use case on sama5d4 where this patch was
> needed to make the whole thing work. Not sure why you submitted this patch if
> you couldn't test it on a real board.
>
> Wenyou, can you confirm that none of the existing SoCs support more than one
> "native" R/B pin?
Yes, I confirmed.
>
> Thanks,
>
> Boris
>
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> > ---
> >
> > .../devicetree/bindings/mtd/atmel-nand.txt | 2 +-
> > drivers/mtd/nand/atmel_nand.c | 35 +++++-----------------
> > drivers/mtd/nand/atmel_nand_nfc.h | 3 +-
> > 3 files changed, 10 insertions(+), 30 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> > b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> > index d53aba9..3e7ee99 100644
> > --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> > +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> > @@ -39,7 +39,7 @@ Optional properties:
> >
> > Nand Flash Controller(NFC) is an optional sub-node Required
> > properties:
> > -- compatible : "atmel,sama5d3-nfc" or "atmel,sama5d4-nfc".
> > +- compatible : "atmel,sama5d3-nfc".
> > - reg : should specify the address and size used for NFC command registers,
> > NFC registers and NFC SRAM. NFC SRAM address and size can be
> absent
> > if don't want to use it.
> > diff --git a/drivers/mtd/nand/atmel_nand.c
> > b/drivers/mtd/nand/atmel_nand.c index efc8ea2..68b9160 100644
> > --- a/drivers/mtd/nand/atmel_nand.c
> > +++ b/drivers/mtd/nand/atmel_nand.c
> > @@ -67,10 +67,6 @@ struct atmel_nand_caps {
> > uint8_t pmecc_max_correction;
> > };
> >
> > -struct atmel_nand_nfc_caps {
> > - uint32_t rb_mask;
> > -};
> > -
> > /*
> > * oob layout for large page size
> > * bad block info is on bytes 0 and 1 @@ -129,7 +125,6 @@ struct
> > atmel_nfc {
> > /* Point to the sram bank which include readed data via NFC */
> > void *data_in_sram;
> > bool will_write_sram;
> > - const struct atmel_nand_nfc_caps *caps;
> > };
> > static struct atmel_nfc nand_nfc;
> >
> > @@ -1715,9 +1710,9 @@ static irqreturn_t hsmc_interrupt(int irq, void *dev_id)
> > nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_XFR_DONE);
> > ret = IRQ_HANDLED;
> > }
> > - if (pending & host->nfc->caps->rb_mask) {
> > + if (pending & NFC_SR_RB_EDGE) {
> > complete(&host->nfc->comp_ready);
> > - nfc_writel(host->nfc->hsmc_regs, IDR, host->nfc->caps-
> >rb_mask);
> > + nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_RB_EDGE);
> > ret = IRQ_HANDLED;
> > }
> > if (pending & NFC_SR_CMD_DONE) {
> > @@ -1735,7 +1730,7 @@ static void nfc_prepare_interrupt(struct
> atmel_nand_host *host, u32 flag)
> > if (flag & NFC_SR_XFR_DONE)
> > init_completion(&host->nfc->comp_xfer_done);
> >
> > - if (flag & host->nfc->caps->rb_mask)
> > + if (flag & NFC_SR_RB_EDGE)
> > init_completion(&host->nfc->comp_ready);
> >
> > if (flag & NFC_SR_CMD_DONE)
> > @@ -1753,7 +1748,7 @@ static int nfc_wait_interrupt(struct atmel_nand_host
> *host, u32 flag)
> > if (flag & NFC_SR_XFR_DONE)
> > comp[index++] = &host->nfc->comp_xfer_done;
> >
> > - if (flag & host->nfc->caps->rb_mask)
> > + if (flag & NFC_SR_RB_EDGE)
> > comp[index++] = &host->nfc->comp_ready;
> >
> > if (flag & NFC_SR_CMD_DONE)
> > @@ -1821,7 +1816,7 @@ static int nfc_device_ready(struct mtd_info *mtd)
> > dev_err(host->dev, "Lost the interrupt flags: 0x%08x\n",
> > mask & status);
> >
> > - return status & host->nfc->caps->rb_mask;
> > + return status & NFC_SR_RB_EDGE;
> > }
> >
> > static void nfc_select_chip(struct mtd_info *mtd, int chip) @@
> > -1994,8 +1989,8 @@ static void nfc_nand_command(struct mtd_info *mtd,
> unsigned int command,
> > }
> > /* fall through */
> > default:
> > - nfc_prepare_interrupt(host, host->nfc->caps->rb_mask);
> > - nfc_wait_interrupt(host, host->nfc->caps->rb_mask);
> > + nfc_prepare_interrupt(host, NFC_SR_RB_EDGE);
> > + nfc_wait_interrupt(host, NFC_SR_RB_EDGE);
> > }
> > }
> >
> > @@ -2426,11 +2421,6 @@ static int atmel_nand_nfc_probe(struct
> platform_device *pdev)
> > }
> > }
> >
> > - nfc->caps = (const struct atmel_nand_nfc_caps *)
> > - of_device_get_match_data(&pdev->dev);
> > - if (!nfc->caps)
> > - return -ENODEV;
> > -
> > nfc_writel(nfc->hsmc_regs, IDR, 0xffffffff);
> > nfc_readl(nfc->hsmc_regs, SR); /* clear the NFC_SR */
> >
> > @@ -2459,17 +2449,8 @@ static int atmel_nand_nfc_remove(struct
> platform_device *pdev)
> > return 0;
> > }
> >
> > -static const struct atmel_nand_nfc_caps sama5d3_nfc_caps = {
> > - .rb_mask = NFC_SR_RB_EDGE0,
> > -};
> > -
> > -static const struct atmel_nand_nfc_caps sama5d4_nfc_caps = {
> > - .rb_mask = NFC_SR_RB_EDGE3,
> > -};
> > -
> > static const struct of_device_id atmel_nand_nfc_match[] = {
> > - { .compatible = "atmel,sama5d3-nfc", .data = &sama5d3_nfc_caps },
> > - { .compatible = "atmel,sama5d4-nfc", .data = &sama5d4_nfc_caps },
> > + { .compatible = "atmel,sama5d3-nfc" },
> > { /* sentinel */ }
> > };
> > MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match); diff --git
> > a/drivers/mtd/nand/atmel_nand_nfc.h
> > b/drivers/mtd/nand/atmel_nand_nfc.h
> > index 0bbc1fa..4d5d262 100644
> > --- a/drivers/mtd/nand/atmel_nand_nfc.h
> > +++ b/drivers/mtd/nand/atmel_nand_nfc.h
> > @@ -42,8 +42,7 @@
> > #define NFC_SR_UNDEF (1 << 21)
> > #define NFC_SR_AWB (1 << 22)
> > #define NFC_SR_ASE (1 << 23)
> > -#define NFC_SR_RB_EDGE0 (1 << 24)
> > -#define NFC_SR_RB_EDGE3 (1 << 27)
> > +#define NFC_SR_RB_EDGE (1 << 24)
> >
> > #define ATMEL_HSMC_NFC_IER 0x0c
> > #define ATMEL_HSMC_NFC_IDR 0x10
>
>
>
> --
> Boris Brezillon, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com
Best Regards,
Wenyou Yang
More information about the linux-mtd
mailing list