[PATCH v7 06/10] mtd: spi-nor: check return value from write
Brian Norris
computersforpeace at gmail.com
Thu May 5 17:31:52 PDT 2016
From: Michal Suchanek <hramrach at gmail.com>
SPI NOR hardware drivers now return useful value from their write
functions so check them.
Signed-off-by: Michal Suchanek <hramrach at gmail.com>
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
v6 -> v7:
* no change
drivers/mtd/spi-nor/spi-nor.c | 45 ++++++++++++++++++++++++++++++-------------
1 file changed, 32 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index f7ffec60a460..dd5c9eb9b9e0 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1062,10 +1062,14 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
nor->program_opcode = SPINOR_OP_BP;
/* write one byte. */
- nor->write(nor, to, 1, retlen, buf);
+ ret = nor->write(nor, to, 1, retlen, buf);
+ if (ret < 0)
+ goto sst_write_err;
+ WARN(ret != 1, "While writing 1 byte written %i bytes\n",
+ (int)ret);
ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto time_out;
+ goto sst_write_err;
}
to += actual;
@@ -1074,10 +1078,14 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
nor->program_opcode = SPINOR_OP_AAI_WP;
/* write two bytes. */
- nor->write(nor, to, 2, retlen, buf + actual);
+ ret = nor->write(nor, to, 2, retlen, buf + actual);
+ if (ret < 0)
+ goto sst_write_err;
+ WARN(ret != 2, "While writing 2 bytes written %i bytes\n",
+ (int)ret);
ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto time_out;
+ goto sst_write_err;
to += 2;
nor->sst_write_second = true;
}
@@ -1086,21 +1094,24 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
write_disable(nor);
ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto time_out;
+ goto sst_write_err;
/* Write out trailing byte if it exists. */
if (actual != len) {
write_enable(nor);
nor->program_opcode = SPINOR_OP_BP;
- nor->write(nor, to, 1, retlen, buf + actual);
-
+ ret = nor->write(nor, to, 1, retlen, buf + actual);
+ if (ret < 0)
+ goto sst_write_err;
+ WARN(ret != 1, "While writing 1 byte written %i bytes\n",
+ (int)ret);
ret = spi_nor_wait_till_ready(nor);
if (ret)
- goto time_out;
+ goto sst_write_err;
write_disable(nor);
}
-time_out:
+sst_write_err:
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
return ret;
}
@@ -1129,14 +1140,18 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
/* do all the bytes fit onto one page? */
if (page_offset + len <= nor->page_size) {
- nor->write(nor, to, len, retlen, buf);
+ ret = nor->write(nor, to, len, retlen, buf);
+ if (ret < 0)
+ goto write_err;
} else {
/* the size of data remaining on the first page */
page_size = nor->page_size - page_offset;
- nor->write(nor, to, page_size, retlen, buf);
+ ret = nor->write(nor, to, page_size, retlen, buf);
+ if (ret < 0)
+ goto write_err;
/* write everything in nor->page_size chunks */
- for (i = page_size; i < len; i += page_size) {
+ for (i = ret; i < len; ) {
page_size = len - i;
if (page_size > nor->page_size)
page_size = nor->page_size;
@@ -1147,7 +1162,11 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
write_enable(nor);
- nor->write(nor, to + i, page_size, retlen, buf + i);
+ ret = nor->write(nor, to + i, page_size, retlen,
+ buf + i);
+ if (ret < 0)
+ goto write_err;
+ i += ret;
}
}
--
2.8.0.rc3.226.g39d4020
More information about the linux-mtd
mailing list