[LINUX PATCH 1/2] mtd: Added dummy entry in the spi_transfer structure.

Lakshmi Sai Krishna Potthuri lakshmi.sai.krishna.potthuri at xilinx.com
Wed Mar 30 23:14:24 PDT 2016



>-----Original Message-----
>From: Mark Brown [mailto:broonie at kernel.org]
>Sent: Friday, March 25, 2016 8:31 PM
>To: Lakshmi Sai Krishna Potthuri <lakshmis at xilinx.com>
>Cc: Michal Simek <michals at xilinx.com>; Soren Brinkmann
><sorenb at xilinx.com>; David Woodhouse <dwmw2 at infradead.org>; Brian
>Norris <computersforpeace at gmail.com>; Javier Martinez Canillas
><javier at osg.samsung.com>; Boris Brezillon <boris.brezillon at free-
>electrons.com>; Stephen Warren <swarren at nvidia.com>; Geert
>Uytterhoeven <geert+renesas at glider.be>; Andrew F. Davis <afd at ti.com>;
>Marek Vasut <marex at denx.de>; Jagan Teki <jteki at openedev.com>; Rafał
>Miłecki <zajec5 at gmail.com>; linux-mtd at lists.infradead.org; linux-
>kernel at vger.kernel.org; linux-spi at vger.kernel.org; linux-arm-
>kernel at lists.infradead.org; Harini Katakam <harinik at xilinx.com>; Punnaiah
>Choudary Kalluri <punnaia at xilinx.com>; Anirudha Sarangi
><anirudh at xilinx.com>
>Subject: Re: [LINUX PATCH 1/2] mtd: Added dummy entry in the spi_transfer
>structure.
>
>On Fri, Mar 25, 2016 at 01:41:16PM +0000, Lakshmi Sai Krishna Potthuri wrote:
>
>As I'm fairly sure I've said before please fix your mail client to word
>wrap within paragraphs at something substantially less than 80 columns.
>Doing this makes your messages much easier to read and reply to.
>

Sorry, there was some issue with my mail client, now I corrected it.

>> >This is really not what I'd expect to happen, I'd expect that these dummy
>> >cycles would be in addition to the actual data (see my request for better
>> >documentation...).  If they overlap with the data then what is the point in
>> >specifying this?  It's more work for the host, what benefit do we get from
>> >doing it over just handing it like a normal byte?
>
>> len field in the transfer structure contains dummy bytes along with actual
>data
>> bytes, controllers which requires dummy bytes use len field and simply
>Ignore
>> the dummy field (contains only no of cycles)added in this patch. Controllers
>> (like ZynqMP GQSPI) expects dummy in cycles won't work directly by using
>> len field because host driver doesn't know that len field of a particular
>transfer
>> includes dummy bytes or not (and also number of dummy bytes included in
>len
>> field). In such cases driver use this dummy field to identify the number of
>dummy
>> cycles and based on that it will send the required number of dummy cycles
>(which
>> i did in the second patch).
>
>This doesn't make any sense at all to me.  Why does the controller care
>what the bytes being sent to and from the device mean?

>From the flash point of view, it expects the controller to send the dummy
on 1/2/4 lines based on the command. For Quad commands, flash expects
4 lines to be active during dummy phase. Similarly, 2 lines for dual
Commands and 1 line for normal/fast commands.
Since len field contains total number of cmd+addr+dummy bytes,
host driver should take care of sending these bytes on their respective
bus widths. Knowing when the dummy is being sent also helps in
the correct switching of IO pads (since the data lines are bidirectional)
ZynqMP GQSPI is a generic controller, majorly interfaced to flash devices.
It seems reasonable for it to know the above information from
the flash layer. Adding "dummy" cycles entry should be useful to any
controller that cares about it without affecting other spi/qspi controllers.

Regards
Sai Krishna



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.




More information about the linux-mtd mailing list