[PATCH 06/11] mtd: nand_bbt: use struct nand_bbt_ops in BBT
Peter Pan
peterpansjtu at gmail.com
Sun Mar 13 19:47:59 PDT 2016
From: Brian Norris <computersforpeace at gmail.com>
Since NAND already create its nand_bbt struct, we can use erase()
hook instead of call nand_erase_nand() directly. Also, we can use
is_bad_bbm() to avoid passing badblock_pattern to BBT.
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
[Peter: remove @buf in create_bbt()
introduce struct nand_bbt_ops]
Signed-off-by: Peter Pan <peterpandong at micron.com>
---
drivers/mtd/nand/nand_bbt.c | 140 +++++---------------------------------------
1 file changed, 14 insertions(+), 126 deletions(-)
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 2ac90a1..d319822 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -122,23 +122,6 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc
}
/**
- * check_short_pattern - [GENERIC] check if a pattern is in the buffer
- * @buf: the buffer to search
- * @td: search pattern descriptor
- *
- * Check for a pattern at the given place. Used to search bad block tables and
- * good / bad block identifiers. Same as check_pattern, but no optional empty
- * check.
- */
-static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
-{
- /* Compare the pattern */
- if (memcmp(buf + td->offs, td->pattern, td->len))
- return -1;
- return 0;
-}
-
-/**
* add_marker_len - compute the length of the marker in data area
* @td: BBT descriptor used for computation
*
@@ -409,63 +392,24 @@ static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
}
}
-/* Scan a given block partially */
-static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
- loff_t offs, uint8_t *buf, int numpages)
-{
- struct mtd_oob_ops ops;
- int j, ret;
-
- ops.ooblen = mtd->oobsize;
- ops.oobbuf = buf;
- ops.ooboffs = 0;
- ops.datbuf = NULL;
- ops.mode = MTD_OPS_PLACE_OOB;
-
- for (j = 0; j < numpages; j++) {
- /*
- * Read the full oob until read_oob is fixed to handle single
- * byte reads for 16 bit buswidth.
- */
- ret = mtd_read_oob(mtd, offs, &ops);
- /* Ignore ECC errors when checking for BBM */
- if (ret && !mtd_is_bitflip_or_eccerr(ret))
- return ret;
-
- if (check_short_pattern(buf, bd))
- return 1;
-
- offs += mtd->writesize;
- }
- return 0;
-}
-
/**
* create_bbt - [GENERIC] Create a bad block table by scanning the device
* @mtd: MTD device structure
- * @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
* @chip: create the table for a specific chip, -1 read all chips; applies only
* if NAND_BBT_PERCHIP option is set
*
* Create a bad block table by scanning the device for the given good/bad block
* identify pattern.
*/
-static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
- struct nand_bbt_descr *bd, int chip)
+static int create_bbt(struct mtd_info *mtd, int chip)
{
struct nand_chip *this = mtd_to_nand(mtd);
- int i, numblocks, numpages;
- int startblock;
+ int i, numblocks, startblock;
loff_t from;
+ struct nand_bbt *nand_bbt = nand_get_bbt(this);
pr_info("Scanning device for bad blocks\n");
- if (bd->options & NAND_BBT_SCAN2NDPAGE)
- numpages = 2;
- else
- numpages = 1;
-
if (chip == -1) {
numblocks = mtd->size >> this->bbt_erase_shift;
startblock = 0;
@@ -482,15 +426,10 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
from = (loff_t)startblock << this->bbt_erase_shift;
}
- if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
- from += mtd->erasesize - (mtd->writesize * numpages);
-
for (i = startblock; i < numblocks; i++) {
int ret;
- BUG_ON(bd->options & NAND_BBT_NO_OOB);
-
- ret = scan_block_fast(mtd, bd, from, buf, numpages);
+ ret = nand_bbt->bbt_ops->is_bad_bbm(mtd, from);
if (ret < 0)
return ret;
@@ -619,7 +558,6 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
int chipsel)
{
struct nand_chip *this = mtd_to_nand(mtd);
- struct erase_info einfo;
int i, res, chip = 0;
int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
int nrchips, pageoffs, ooboffs;
@@ -628,6 +566,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
size_t retlen, len = 0;
loff_t to;
struct mtd_oob_ops ops;
+ struct nand_bbt *nand_bbt = nand_get_bbt(this);
ops.ooblen = mtd->oobsize;
ops.ooboffs = 0;
@@ -782,11 +721,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
buf[offs + (i >> sft)] &= ~(msk[dat] << sftcnt);
}
- memset(&einfo, 0, sizeof(einfo));
- einfo.mtd = mtd;
- einfo.addr = to;
- einfo.len = 1 << this->bbt_erase_shift;
- res = nand_erase_nand(mtd, &einfo, 1);
+ res = nand_bbt->bbt_ops->erase(mtd, to);
if (res < 0)
goto outerr;
@@ -812,30 +747,26 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
/**
* nand_memory_bbt - [GENERIC] create a memory based bad block table
* @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
*
* The function creates a memory based bbt by scanning the device for
* manufacturer / software marked good / bad blocks.
*/
-static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+static inline int nand_memory_bbt(struct mtd_info *mtd)
{
- struct nand_chip *this = mtd_to_nand(mtd);
-
- return create_bbt(mtd, this->buffers->databuf, bd, -1);
+ return create_bbt(mtd, -1);
}
/**
* check_create - [GENERIC] create and write bbt(s) if necessary
* @mtd: MTD device structure
* @buf: temporary buffer
- * @bd: descriptor for the good/bad block search pattern
*
* The function checks the results of the previous call to read_bbt and creates
* / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
* for the chip/device. Update is necessary if one of the tables is missing or
* the version nr. of one table is less than the other.
*/
-static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
+static int check_create(struct mtd_info *mtd, uint8_t *buf)
{
int i, chips, writeops, create, chipsel, res, res2;
struct nand_chip *this = mtd_to_nand(mtd);
@@ -895,7 +826,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
/* Create the table in memory by scanning the chip(s) */
if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
- create_bbt(mtd, buf, bd, chipsel);
+ create_bbt(mtd, chipsel);
td->version[i] = 1;
if (md)
@@ -1063,7 +994,6 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
/**
* nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
* @mtd: MTD device structure
- * @bd: descriptor for the good/bad block search pattern
*
* The function checks, if a bad block table(s) is/are already available. If
* not it scans the device for manufacturer marked good / bad blocks and writes
@@ -1072,7 +1002,7 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
* The bad block table memory is allocated here. It must be freed by calling
* the nand_free_bbt function.
*/
-static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+static int nand_scan_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd_to_nand(mtd);
int len, res;
@@ -1094,7 +1024,7 @@ static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
* memory based bad block table.
*/
if (!td) {
- if ((res = nand_memory_bbt(mtd, bd))) {
+ if ((res = nand_memory_bbt(mtd))) {
pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
goto err;
}
@@ -1120,7 +1050,7 @@ static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
search_read_bbts(mtd, buf, td, md);
}
- res = check_create(mtd, buf, bd);
+ res = check_create(mtd, buf);
if (res)
goto err;
@@ -1193,12 +1123,6 @@ static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
return res;
}
-/*
- * Define some generic bad / good block scan pattern which are used
- * while scanning a device for factory marked good / bad blocks.
- */
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
/* Generic flash bbt descriptors */
static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
@@ -1243,35 +1167,6 @@ static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
.pattern = mirror_pattern
};
-#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
-/**
- * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
- * @this: NAND chip to create descriptor for
- *
- * This function allocates and initializes a nand_bbt_descr for BBM detection
- * based on the properties of @this. The new descriptor is stored in
- * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
- * passed to this function.
- */
-static int nand_create_badblock_pattern(struct nand_chip *this)
-{
- struct nand_bbt_descr *bd;
- if (this->badblock_pattern) {
- pr_warn("Bad block pattern already allocated; not replacing\n");
- return -EINVAL;
- }
- bd = kzalloc(sizeof(*bd), GFP_KERNEL);
- if (!bd)
- return -ENOMEM;
- bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
- bd->offs = this->badblockpos;
- bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
- bd->pattern = scan_ff_pattern;
- bd->options |= NAND_BBT_DYNAMICSTRUCT;
- this->badblock_pattern = bd;
- return 0;
-}
-
/**
* nand_default_bbt - [NAND Interface] Select a default bad block table for the device
* @mtd: MTD device structure
@@ -1282,7 +1177,6 @@ static int nand_create_badblock_pattern(struct nand_chip *this)
int nand_default_bbt(struct mtd_info *mtd)
{
struct nand_chip *this = mtd_to_nand(mtd);
- int ret;
/* Is a flash based bad block table requested? */
if (this->bbt_options & NAND_BBT_USE_FLASH) {
@@ -1301,13 +1195,7 @@ int nand_default_bbt(struct mtd_info *mtd)
this->bbt_md = NULL;
}
- if (!this->badblock_pattern) {
- ret = nand_create_badblock_pattern(this);
- if (ret)
- return ret;
- }
-
- return nand_scan_bbt(mtd, this->badblock_pattern);
+ return nand_scan_bbt(mtd);
}
/**
--
1.9.1
More information about the linux-mtd
mailing list