[PATCH] mtd: only use __xipram annotation when XIP_KERNEL is set
Arnd Bergmann
arnd at arndb.de
Fri Mar 4 16:19:21 PST 2016
On Friday 04 March 2016 16:02:25 Brian Norris wrote:
> Hi Arnd,
>
> I know you're travelling, but...
>
> On Mon, Jan 25, 2016 at 04:41:50PM +0100, Arnd Bergmann wrote:
> > When XIP_KERNEL is enabled, some functions are defined in the .data
> > ELF section because we require them to be in RAM whenever we communicate
> > with the flash chip. However this causes problems when FTRACE is
> > enabled and gcc emits calls to __gnu_mcount_nc in the function
> > prolog:
> >
> > drivers/built-in.o: In function `cfi_chip_setup':
> > :(.data+0x272fc): relocation truncated to fit: R_ARM_CALL against symbol `__gnu_mcount_nc' defined in .text section in arch/arm/kernel/built-in.o
> > drivers/built-in.o: In function `cfi_probe_chip':
> > :(.data+0x27de8): relocation truncated to fit: R_ARM_CALL against symbol `__gnu_mcount_nc' defined in .text section in arch/arm/kernel/built-in.o
> > /tmp/ccY172rP.s: Assembler messages:
> > /tmp/ccY172rP.s:70: Warning: ignoring changed section attributes for .data
> > /tmp/ccY172rP.s: Error: 1 warning, treating warnings as errors
> > make[5]: *** [drivers/mtd/chips/cfi_probe.o] Error 1
> > /tmp/ccK4rjeO.s: Assembler messages:
> > /tmp/ccK4rjeO.s:421: Warning: ignoring changed section attributes for .data
> > /tmp/ccK4rjeO.s: Error: 1 warning, treating warnings as errors
> > make[5]: *** [drivers/mtd/chips/cfi_util.o] Error 1
> > /tmp/ccUvhCYR.s: Assembler messages:
> > /tmp/ccUvhCYR.s:1895: Warning: ignoring changed section attributes for .data
> > /tmp/ccUvhCYR.s: Error: 1 warning, treating warnings as errors
>
> Can you provide a sample .config that DOES build correctly with
> XIP_KERNEL enabled + this patch? My first attempt yields some other
> failures I don't care to fixup right now...
>
> Anyway, I don't doubt you have a good fix here, so I can probably take
> it. Any review from others would be welcome though.
I found the config in the attachment in my logs.
To get this config working, I also needed this hunk from my set of
old unsubmitted patches:
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
index b3d684098fbf..cb76096a2e36 100644
--- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -20,7 +20,7 @@
#define xip_irqpending() (ICIP & ICMR)
/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
-#define xip_currtime() (OSCR)
-#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4)
+#define xip_currtime() readl_relaxed(OSCR)
+#define xip_elapsed_since(x) (signed)((readl_relaxed(OSCR) - (x)) / 4)
#endif /* __ARCH_SA1100_MTD_XIP_H__ */
Arnd
-------------- next part --------------
A non-text attachment was scrubbed...
Name: xip-config.gz
Type: application/gzip
Size: 29837 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mtd/attachments/20160305/4fce9742/attachment-0001.gz>
More information about the linux-mtd
mailing list