[PATCH v6 2/2] mtd: nand: sunxi: add reset line support
Icenowy Zheng
icenowy at aosc.xyz
Sun Jun 19 21:48:38 PDT 2016
The NAND controller on some sun8i chips needs its reset line to be
deasserted before they can enter working state.
Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
---
Changes in v2:
- Corrected the error checking code of reset line.
Changes in v3:
- Corrected a more serious error brought in the "fix" of v2.
Changes in v4:
- Removed unneeded code block after "else".
Changes in v5:
- Added reassertion code in case of initialization error and device
remove.
Changes in v6:
- Fixed a resource leak by not using goto to exit in case of error.
drivers/mtd/nand/sunxi_nand.c | 28 +++++++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index a83a690..08d5e88 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -39,6 +39,7 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/iopoll.h>
+#include <linux/reset.h>
#define NFC_REG_CTL 0x0000
#define NFC_REG_ST 0x0004
@@ -269,6 +270,7 @@ struct sunxi_nfc {
void __iomem *regs;
struct clk *ahb_clk;
struct clk *mod_clk;
+ struct reset_control *reset;
unsigned long assigned_cs;
unsigned long clk_rate;
struct list_head chips;
@@ -1871,26 +1873,42 @@ static int sunxi_nfc_probe(struct platform_device *pdev)
if (ret)
goto out_ahb_clk_unprepare;
+ nfc->reset = devm_reset_control_get_optional(dev, "ahb");
+
+ if (!IS_ERR(nfc->reset)) {
+ ret = reset_control_deassert(nfc->reset);
+ if (ret) {
+ dev_err(dev, "reset err %d\n", ret);
+ goto out_mod_clk_unprepare;
+ }
+ } else if (PTR_ERR(nfc->reset) != -ENOENT) {
+ ret = PTR_ERR(nfc->reset);
+ goto out_mod_clk_unprepare;
+ }
+
ret = sunxi_nfc_rst(nfc);
if (ret)
- goto out_mod_clk_unprepare;
+ goto out_ahb_reset_reassert;
writel(0, nfc->regs + NFC_REG_INT);
ret = devm_request_irq(dev, irq, sunxi_nfc_interrupt,
0, "sunxi-nand", nfc);
if (ret)
- goto out_mod_clk_unprepare;
+ goto out_ahb_reset_reassert;
platform_set_drvdata(pdev, nfc);
ret = sunxi_nand_chips_init(dev, nfc);
if (ret) {
dev_err(dev, "failed to init nand chips\n");
- goto out_mod_clk_unprepare;
+ goto out_ahb_reset_reassert;
}
return 0;
+out_ahb_reset_reassert:
+ if (!IS_ERR(nfc->reset))
+ reset_control_assert(nfc->reset);
out_mod_clk_unprepare:
clk_disable_unprepare(nfc->mod_clk);
out_ahb_clk_unprepare:
@@ -1904,6 +1922,10 @@ static int sunxi_nfc_remove(struct platform_device *pdev)
struct sunxi_nfc *nfc = platform_get_drvdata(pdev);
sunxi_nand_chips_cleanup(nfc);
+
+ if (!IS_ERR(nfc->reset))
+ reset_control_assert(nfc->reset);
+
clk_disable_unprepare(nfc->mod_clk);
clk_disable_unprepare(nfc->ahb_clk);
--
2.9.0
More information about the linux-mtd
mailing list