[PATCH v3 3/8] MTD: xway: the latched command should be persistent
Boris Brezillon
boris.brezillon at free-electrons.com
Sun Jun 19 09:22:32 PDT 2016
On Sun, 19 Jun 2016 18:08:12 +0200
Hauke Mehrtens <hauke at hauke-m.de> wrote:
> From: John Crispin <john at phrozen.org>
>
> With each write the pins on the NAND flash chip have to be activated.
> Instead of setting them only when NAND_CTRL_CHANGE is given, always set
> them.
This commit message is a bit fuzzy. How about:
"
mtd: nand: xway: Avoid messing up with IO_ADDR_W in ->cmd_ctrl()
The ->cmd_ctrl() function is adjusting the ->IO_ADDR_W value depending
on the command type each time NAND_CTRL_CHANGE is passed. This is not
only useless but can lead to an ->IO_ADDR_W corruption.
Get rid of this logic and rely on the NAND_CLE and NAND_ALE flags to
deduce the iomem address to write the cmd argument to.
"
BTW, please use the "mtd: nand: <nand-controller-driver>: " prefix in
your subject line (this applies to all the patches you sent so far).
>
> Signed-off-by: John Crispin <john at phrozen.org>
> Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
> ---
> drivers/mtd/nand/xway_nand.c | 26 +++++++++++---------------
> 1 file changed, 11 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
> index ec189e5..6028edb 100644
> --- a/drivers/mtd/nand/xway_nand.c
> +++ b/drivers/mtd/nand/xway_nand.c
> @@ -107,22 +107,18 @@ static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
> unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
> unsigned long flags;
>
> - if (ctrl & NAND_CTRL_CHANGE) {
> - nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
> - if (ctrl & NAND_CLE)
> - nandaddr |= NAND_WRITE_CMD;
> - else
> - nandaddr |= NAND_WRITE_ADDR;
> - this->IO_ADDR_W = (void __iomem *) nandaddr;
> - }
> + if (cmd == NAND_CMD_NONE)
> + return;
>
> - if (cmd != NAND_CMD_NONE) {
> - spin_lock_irqsave(&ebu_lock, flags);
> - writeb(cmd, this->IO_ADDR_W);
> - while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
> - ;
> - spin_unlock_irqrestore(&ebu_lock, flags);
> - }
> + spin_lock_irqsave(&ebu_lock, flags);
> + if (ctrl & NAND_CLE)
> + writeb(cmd, (void __iomem *) (nandaddr | NAND_WRITE_CMD));
> + else if (ctrl & NAND_ALE)
> + writeb(cmd, (void __iomem *) (nandaddr | NAND_WRITE_ADDR));
> +
> + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
> + ;
> + spin_unlock_irqrestore(&ebu_lock, flags);
> }
>
> static int xway_dev_ready(struct mtd_info *mtd)
More information about the linux-mtd
mailing list