[PATCH v2 1/6] mtd: nand: gpmi: add GPMI NAND support for i.MX7D
Han Xu
han.xu at nxp.com
Fri Jun 10 10:01:29 PDT 2016
support GPMI NAND on i.MX7D
Signed-off-by: Han Xu <han.xu at nxp.com>
---
drivers/mtd/nand/gpmi-nand/bch-regs.h | 14 +++++++-------
drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 10 ++++++----
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 30 ++++++++++++++++++++++++------
drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 7 +++++--
4 files changed, 42 insertions(+), 19 deletions(-)
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
index 05bb91f..228142c 100644
--- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -1,7 +1,7 @@
/*
* Freescale GPMI NAND Flash Driver
*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008-2016 Freescale Semiconductor, Inc.
* Copyright 2008 Embedded Alley Solutions, Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -54,7 +54,7 @@
#define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0 11
#define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0 (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
#define BF_BCH_FLASH0LAYOUT0_ECC0(v, x) \
- (GPMI_IS_MX6(x) \
+ ((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) \
? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) \
& MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0) \
: (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) \
@@ -65,7 +65,7 @@
#define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \
(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
#define BF_BCH_FLASH0LAYOUT0_GF(v, x) \
- ((GPMI_IS_MX6(x) && ((v) == 14)) \
+ (((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14)) \
? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \
& MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \
: 0 \
@@ -77,7 +77,7 @@
#define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
(0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x) \
- (GPMI_IS_MX6(x) \
+ ((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) \
? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
: ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
)
@@ -96,7 +96,7 @@
#define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN 11
#define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
#define BF_BCH_FLASH0LAYOUT1_ECCN(v, x) \
- (GPMI_IS_MX6(x) \
+ ((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) \
? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) \
& MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN) \
: (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) \
@@ -107,7 +107,7 @@
#define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \
(0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
#define BF_BCH_FLASH0LAYOUT1_GF(v, x) \
- ((GPMI_IS_MX6(x) && ((v) == 14)) \
+ (((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) && ((v) == 14)) \
? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \
& MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \
: 0 \
@@ -119,7 +119,7 @@
#define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
(0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x) \
- (GPMI_IS_MX6(x) \
+ ((GPMI_IS_MX6(x) || GPMI_IS_MX7(x)) \
? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
: ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 0f68a99..358ff5d 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -1,7 +1,7 @@
/*
* Freescale GPMI NAND Flash Driver
*
- * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008-2016 Freescale Semiconductor, Inc.
* Copyright (C) 2008 Embedded Alley Solutions, Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -971,7 +971,8 @@ int gpmi_extra_init(struct gpmi_nand_data *this)
struct nand_chip *chip = &this->nand;
/* Enable the asynchronous EDO feature. */
- if (GPMI_IS_MX6(this) && chip->onfi_version) {
+ if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
+ chip->onfi_version) {
int mode = onfi_get_async_timing_mode(chip);
/* We only support the timing mode 4 and mode 5. */
@@ -1093,12 +1094,13 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
if (GPMI_IS_MX23(this)) {
mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
- } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
+ } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this) ||
+ GPMI_IS_MX7(this)) {
/*
* In the imx6, all the ready/busy pins are bound
* together. So we only need to check chip 0.
*/
- if (GPMI_IS_MX6(this))
+ if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
chip = 0;
/* MX28 shares the same R/B register as MX6Q. */
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 6e46156..a8936fd 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1,7 +1,7 @@
/*
* Freescale GPMI NAND Flash Driver
*
- * Copyright (C) 2010-2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2016 Freescale Semiconductor, Inc.
* Copyright (C) 2008 Embedded Alley Solutions, Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -110,6 +110,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6sx = {
.max_chain_delay = 12,
};
+static const struct gpmi_devdata gpmi_devdata_imx7d = {
+ .type = IS_MX7D,
+ .bch_max_ecc_strength = 62,
+ .max_chain_delay = 12,
+};
+
static irqreturn_t bch_irq(int irq, void *cookie)
{
struct gpmi_nand_data *this = cookie;
@@ -601,6 +607,10 @@ static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
"gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
};
+static char *extra_clks_for_mx7d[GPMI_CLK_MAX] = {
+ "gpmi_bch_apb",
+};
+
static int gpmi_get_clks(struct gpmi_nand_data *this)
{
struct resources *r = &this->resources;
@@ -618,6 +628,8 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
/* Get extra clocks */
if (GPMI_IS_MX6(this))
extra_clks = extra_clks_for_mx6q;
+ if (GPMI_IS_MX7(this))
+ extra_clks = extra_clks_for_mx7d;
if (!extra_clks)
return 0;
@@ -634,7 +646,7 @@ static int gpmi_get_clks(struct gpmi_nand_data *this)
r->clock[i] = clk;
}
- if (GPMI_IS_MX6(this))
+ if (GPMI_IS_MX6(this) || GPMI_IS_MX7(this))
/*
* Set the default value for the gpmi clock.
*
@@ -1965,8 +1977,8 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
* (1) the chip is imx6, and
* (2) the size of the ECC parity is byte aligned.
*/
- if (GPMI_IS_MX6(this) &&
- ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
+ if ((GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) &&
+ ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
ecc->read_subpage = gpmi_ecc_read_subpage;
chip->options |= NAND_SUBPAGE_READ;
}
@@ -1987,6 +1999,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
struct nand_chip *chip = &this->nand;
struct mtd_info *mtd = nand_to_mtd(chip);
int ret;
+ int max_chips;
/* init current chip */
this->current_chip = -1;
@@ -2021,7 +2034,8 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
if (ret)
goto err_out;
- ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
+ max_chips = (GPMI_IS_MX6(this) || GPMI_IS_MX7(this)) ? 2 : 1;
+ ret = nand_scan_ident(mtd, max_chips, NULL);
if (ret)
goto err_out;
@@ -2074,7 +2088,11 @@ static const struct of_device_id gpmi_nand_id_table[] = {
}, {
.compatible = "fsl,imx6sx-gpmi-nand",
.data = &gpmi_devdata_imx6sx,
- }, {}
+ }, {
+ .compatible = "fsl,imx7d-gpmi-nand",
+ .data = &gpmi_devdata_imx7d,
+ }, { /* sentinel */ }
+
};
MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index 4e49a1f..04a3584 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -1,7 +1,7 @@
/*
* Freescale GPMI NAND Flash Driver
*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2010-2016 Freescale Semiconductor, Inc.
* Copyright (C) 2008 Embedded Alley Solutions, Inc.
*
* This program is free software; you can redistribute it and/or modify
@@ -123,7 +123,8 @@ enum gpmi_type {
IS_MX23,
IS_MX28,
IS_MX6Q,
- IS_MX6SX
+ IS_MX6SX,
+ IS_MX7D,
};
struct gpmi_devdata {
@@ -305,6 +306,8 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
+#define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)
#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#define GPMI_IS_MX7(x) (GPMI_IS_MX7D(x))
#endif
--
1.9.1
More information about the linux-mtd
mailing list