[PATCH 4/6] mtd: nand: Add OMAP_GPMC as a dependency to MTD_NAND_OMAP2

[Boris Brezillon]

On Thu,  9 Jun 2016 12:02:55 -0500
Franklin S Cooper Jr <fcooper at ti.com> wrote:

> OMAP 2 NAND depends on the GPMC driver. Therefore, insure that the OMAP
> GPMC config is selected before enabling the OMAP 2 NAND driver.
> 
> Signed-off-by: Franklin S Cooper Jr <fcooper at ti.com>
> ---
>  drivers/mtd/nand/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index f05e0e9..e24404f 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -89,7 +89,7 @@ config MTD_NAND_AMS_DELTA
>  
>  config MTD_NAND_OMAP2
>  	tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
> -	depends on ARCH_OMAP2PLUS
> +	depends on ARCH_OMAP2PLUS && OMAP_GPMC

If you add

	depends on ARCH_OMAP2PLUS

in the OMAP_GPMC driver, you can just drop the ARCH_OMAP2PLUS
dependency here.

>  	help
>            Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
>  	  platforms.



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com