[PATCH 5/7] mtd: nand: Add Hynix H27UBG8T2BTR-BC to nand_ids table

Aleksei Mamlin mamlinav at gmail.com
Mon Jun 6 12:59:03 PDT 2016


On Mon, 6 Jun 2016 20:55:49 +0200
Boris Brezillon <boris.brezillon at free-electrons.com> wrote:

> On Mon,  6 Jun 2016 13:24:22 +0300
> Aleksei Mamlin <mamlinav at gmail.com> wrote:
> 
> > Add the full description of the Hynix H27UBG8T2BTR-BC NAND chip in the
> > nand_ids table so that we can later use the NAND ECC infos and ONFI timings
> > mode in controller drivers.
> 
> Still hoping to get this series [1] merged in 4.8, but if that's
> not the case, I'll apply your patch.
> 
> BTW, that would be great if you could test it on your platforms.
> 

It seems that Hynix-specific initialization code can't handle H27UBG8T2BTR-BC
chip:

[    0.886153] nand: Could not find valid ONFI parameter page; aborting
[    0.892665] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xd7
[    0.899025] nand: Hynix 1c03000.nand
[    0.902596] nand: bus width 8 instead 16 bit
[    0.906858] nand: No NAND device found
[    0.910620] sunxi_nand 1c03000.nand: failed to init nand chips
[    0.916528] sunxi_nand: probe of 1c03000.nand failed with error -22

> 
> Regards,
> 
> Boris
> 
> [1]https://lkml.org/lkml/2016/5/27/264
> 
> > 
> > Signed-off-by: Aleksei Mamlin <mamlinav at gmail.com>
> > ---
> >  drivers/mtd/nand/nand_ids.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
> > index ccc05f5..ccdc773 100644
> > --- a/drivers/mtd/nand/nand_ids.c
> > +++ b/drivers/mtd/nand/nand_ids.c
> > @@ -52,6 +52,10 @@ struct nand_flash_dev nand_flash_ids[] = {
> >  		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
> >  		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
> >  		  NAND_ECC_INFO(40, SZ_1K), 4 },
> > +	{"H27UBG8T2BTR-BC 32G 3.3V 8-bit",
> > +		{ .id = {0xad, 0xd7, 0x94, 0xda, 0x74, 0xc3} },
> > +		  SZ_8K, SZ_4K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
> > +		  NAND_ECC_INFO(40, SZ_1K), 0 },
> >  
> >  	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
> >  	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
> 
> 
> 
> -- 
> Boris Brezillon, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com


-- 
Thanks and regards,
Aleksei Mamlin



More information about the linux-mtd mailing list