[PATCH v5 0/8] Broadcom stb, nsp, ns2, cygnus QSPI driver

Kamal Dasu kdasu.kdev at gmail.com
Fri Jul 29 15:13:05 PDT 2016


This is V5 changes for common spi driver for the brcmstb, nsp, ns2, cygnus
SoCs. Changes include driver for  standard MSPI and accelerated BSPI blocks.
The Brodcom STB uses l2-intc where as the SoC specific interrupt handling
code has been separated in a new  driver. In case of NS and NS2 SoCs it does
not have a dedicated l2 controller and the interrupts are specific to the 
spi core. The drivers are organized in the follwoing way:
 
 drivers/spi/spi-bcm-qspi.c      - Common MSPI, BSPI driver

 drivers/spi/spi-bcm-qspi.h      - Common header 

 drivers/spi/spi-brcmstb-qspi.c  - SoC specific wth brcm,spi-brcmstb-qspi 
                                   compatibility, does not have anything 
                                   specific for stb SoC

 drivers/spi/spi-nsp-qspi.c      - Implements the interrupt hooks used by 
                                   the common driver with "brcm,spi-nsp-qspi"
                                   compatibility
Changes in V5:
 - Added additional description in the binding documentation non MSPI and BSPI SoC IP
 - Split commits for MSPI spi driver and accelarated BSPI driver used for accelerated
   flash reads
 - Removed any parsing of transfer structures for commands
 - Other code cleanup for readability
 - Kept the interrupt handling code in separate driver, since hardware abstraction and l2
   controller driver in software do not exisit certain SoCs

Kamal Dasu (8):
  Documentation: dt: spi: Add BRCMSTB SoC bindings
  spi: bcm-qspi: Add Broadcom MSPI driver
  spi: bcm-qspi: Add BSPI spi-nor flash controller driver
  mtd: m25p80: Let m25p80_read() fallback to spi transfer
  Documentation: dt: spi: Add Broadcom NSP, NS2 SoC bindings
  arm: dts: Add bcm-nsp and bcm958625k support
  arm64: dts: Add ns2 SoC support
  spi: nsp-qspi: Add Broadcom NSP, NS2, Cygnus SoC support

 .../devicetree/bindings/spi/brcm,spi-bcm-qspi.txt  |  235 ++++
 arch/arm/boot/dts/bcm-nsp.dtsi                     |   33 +-
 arch/arm/boot/dts/bcm958625k.dts                   |   34 +
 arch/arm64/boot/dts/broadcom/ns2-svk.dts           |   34 +-
 arch/arm64/boot/dts/broadcom/ns2.dtsi              |   19 +
 drivers/mtd/devices/m25p80.c                       |    7 +-
 drivers/spi/Kconfig                                |   10 +
 drivers/spi/Makefile                               |    1 +
 drivers/spi/spi-bcm-qspi.c                         | 1440 ++++++++++++++++++++
 drivers/spi/spi-bcm-qspi.h                         |  112 ++
 drivers/spi/spi-brcmstb-qspi.c                     |   53 +
 drivers/spi/spi-nsp-qspi.c                         |  158 +++
 12 files changed, 2126 insertions(+), 10 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
 create mode 100644 drivers/spi/spi-bcm-qspi.c
 create mode 100644 drivers/spi/spi-bcm-qspi.h
 create mode 100644 drivers/spi/spi-brcmstb-qspi.c
 create mode 100644 drivers/spi/spi-nsp-qspi.c

-- 
1.9.1




More information about the linux-mtd mailing list