[PATCH v8 6/7] mtd: nand: gpmi: correct bitflip for erased NAND page
Brian Norris
computersforpeace at gmail.com
Sat Jan 23 15:01:47 PST 2016
+ Markus Pargmann
On Wed, Dec 02, 2015 at 04:47:45PM -0600, Han Xu wrote:
> i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
> bitflip number for erased NAND page. So for these two platform, set the
> erase threshold to ecc_strength and if bitflip detected, GPMI driver will
> correct the data to all 0xFF.
Looks like Marcus is also trying to add SW correction for the same
issue:
http://patchwork.ozlabs.org/patch/559557/
How do those 2 interact (if at all)?
Brian
> Signed-off-by: Han Xu <b45815 at freescale.com>
> ---
> drivers/mtd/nand/gpmi-nand/bch-regs.h | 10 ++++++++++
> drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 5 +++++
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 24 +++++++++++++++++++++++-
> drivers/mtd/nand/gpmi-nand/gpmi-nand.h | 5 ++++-
> 4 files changed, 42 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> index 53e58bc..a84d72b 100644
> --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
> +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> @@ -30,7 +30,13 @@
> #define BM_BCH_CTRL_COMPLETE_IRQ (1 << 0)
>
> #define HW_BCH_STATUS0 0x00000010
> +
> #define HW_BCH_MODE 0x00000020
> +#define BP_BCH_MODE_ERASE_THRESHOLD 0
> +#define BM_BCH_MODE_ERASE_THRESHOLD (0xff << BP_BCH_MODE_ERASE_THRESHOLD)
> +#define BF_BCH_MODE_ERASE_THRESHOLD(v) \
> + (((v) << BP_BCH_MODE_ERASE_THRESHOLD) & BM_BCH_MODE_ERASE_THRESHOLD)
> +
> #define HW_BCH_ENCODEPTR 0x00000030
> #define HW_BCH_DATAPTR 0x00000040
> #define HW_BCH_METAPTR 0x00000050
> @@ -125,4 +131,8 @@
> )
>
> #define HW_BCH_VERSION 0x00000160
> +#define HW_BCH_DEBUG1 0x00000170
> +#define BP_BCH_DEBUG1_ERASED_ZERO_COUNT 0
> +#define BM_BCH_DEBUG1_ERASED_ZERO_COUNT \
> + (0x1ff << BP_BCH_DEBUG1_ERASED_ZERO_COUNT)
> #endif
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> index 1f26a79..0548d84 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -298,6 +298,11 @@ int bch_set_geometry(struct gpmi_nand_data *this)
> | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
> r->bch_regs + HW_BCH_FLASH0LAYOUT1);
>
> + /* Set erase threshold to ecc_strength for mx6qp and mx7 */
> + if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
> + writel(BF_BCH_MODE_ERASE_THRESHOLD(ecc_strength),
> + r->bch_regs + HW_BCH_MODE);
> +
> /* Set *all* chip selects to use layout 0. */
> writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index 9f67f0f..9dea56e 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -71,6 +71,12 @@ static const struct gpmi_devdata gpmi_devdata_imx6q = {
> .max_chain_delay = 12,
> };
>
> +static const struct gpmi_devdata gpmi_devdata_imx6qp = {
> + .type = IS_MX6QP,
> + .bch_max_ecc_strength = 40,
> + .max_chain_delay = 12,
> +};
> +
> static const struct gpmi_devdata gpmi_devdata_imx6sx = {
> .type = IS_MX6SX,
> .bch_max_ecc_strength = 62,
> @@ -1010,6 +1016,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> {
> struct gpmi_nand_data *this = chip->priv;
> struct bch_geometry *nfc_geo = &this->bch_geometry;
> + void __iomem *bch_regs = this->resources.bch_regs;
> void *payload_virt;
> dma_addr_t payload_phys;
> void *auxiliary_virt;
> @@ -1018,6 +1025,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> unsigned char *status;
> unsigned int max_bitflips = 0;
> int ret;
> + int flag = 0;
>
> dev_dbg(this->dev, "page number is : %d\n", page);
> ret = read_page_prepare(this, buf, nfc_geo->payload_size,
> @@ -1050,9 +1058,16 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
>
> for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
> - if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
> + if (*status == STATUS_GOOD)
> continue;
>
> + if (*status == STATUS_ERASED) {
> + if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
> + if (readl(bch_regs + HW_BCH_DEBUG1))
> + flag = 1;
> + continue;
> + }
> +
> if (*status == STATUS_UNCORRECTABLE) {
> mtd->ecc_stats.failed++;
> continue;
> @@ -1081,6 +1096,10 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> nfc_geo->payload_size,
> payload_virt, payload_phys);
>
> + /* if bitflip occurred in erased page, change data to all 0xff */
> + if (flag)
> + memset(buf, 0xff, nfc_geo->payload_size);
> +
> return max_bitflips;
> }
>
> @@ -1990,6 +2009,9 @@ static const struct of_device_id gpmi_nand_id_table[] = {
> .compatible = "fsl,imx6q-gpmi-nand",
> .data = &gpmi_devdata_imx6q,
> }, {
> + .compatible = "fsl,imx6qp-gpmi-nand",
> + .data = (void *)&gpmi_devdata_imx6qp,
> + }, {
> .compatible = "fsl,imx6sx-gpmi-nand",
> .data = &gpmi_devdata_imx6sx,
> }, {
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> index 58b3d69..149a442 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
> @@ -123,6 +123,7 @@ enum gpmi_type {
> IS_MX23,
> IS_MX28,
> IS_MX6Q,
> + IS_MX6QP,
> IS_MX6SX,
> IS_MX7D,
> };
> @@ -306,9 +307,11 @@ void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
> #define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23)
> #define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
> #define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
> +#define GPMI_IS_MX6QP(x) ((x)->devdata->type == IS_MX6QP)
> #define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
> #define GPMI_IS_MX7D(x) ((x)->devdata->type == IS_MX7D)
>
> -#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
> +#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6QP(x)\
> + || GPMI_IS_MX6SX(x))
> #define GPMI_IS_MX7(x) (GPMI_IS_MX7D(x))
> #endif
> --
> 1.9.1
>
More information about the linux-mtd
mailing list