[PATCH v6 1/3] mtd: nand: don't select chip in nand_chip's block_bad op

[Boris Brezillon]

Hi Archit,

On Mon, 18 Jan 2016 15:20:32 +0530
Archit Taneja <architt at codeaurora.org> wrote:

> One of the arguments passed to struct nand_chip's block_bad op is
> 'getchip', which, if true, is supposed to get and select the nand device,
> and later unselect and release the device.
> 
> This op is intended to be replaceable by drivers. The drivers shouldn't
> be responsible for selecting/unselecting chip. Like other ops, the chip
> should already be selected before the block_bad op is called.
> 
> Remove the getchip argument from the block_bad op and
> nand_block_checkbad. Move the chip selection to nand_block_isbad, since it
> is the only caller to nand_block_checkbad which requires chip selection.
> 
> Modify nand_block_bad (the default function for the op) such that it
> doesn't select the chip.
> 
> Signed-off-by: Archit Taneja <architt at codeaurora.org>
> ---
> v6: As suggested by Boris, remove getchip arg altogether and select the
>     chip in nand_block_isbad
> 
>  drivers/mtd/nand/nand_base.c | 41 +++++++++++++++++++----------------------
>  include/linux/mtd/nand.h     |  2 +-
>  2 files changed, 20 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 928081b..1809c20 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -317,9 +317,9 @@ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
>   *
>   * Check, if the block is bad.
>   */
> -static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
> +static int nand_block_bad(struct mtd_info *mtd, loff_t ofs)

You also have to update the dummy ->block_bad() implementations in the
cafe_nand, diskonchip and docg4 drivers.

Best Regards,

Boris

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com