[PATCH v2 05/12] mtd: nand: use new BBT API instead of old ones
Boris Brezillon
boris.brezillon at free-electrons.com
Wed Jan 6 07:22:16 PST 2016
On Tue, 15 Dec 2015 05:59:31 +0000
Peter Pan <peterpansjtu at gmail.com> wrote:
> From: Brian Norris <computersforpeace at gmail.com>
>
> Use new BBT APIs (nand_bbt_*()) in NAND. Keep old APIs (nand_*_bbt())
> exist temporarily.
>
> Signed-off-by: Brian Norris <computersforpeace at gmail.com>
> [Peter: 1. use nand_bbt_markbad_factory() in docg4.c and implement
> 2. nand_create_factory_badblock_pattern(), nand_is_bad_bbm() and
> nand_default_bbt() in nand_base.c
> 3. add NAND_BADBLOCK_PATTERN_ALLOC macro]
> Signed-off-by: Peter Pan <peterpandong at micron.com>
> ---
> drivers/mtd/nand/docg4.c | 6 +-
> drivers/mtd/nand/nand_base.c | 140 ++++++++++++++++++++++++++++++++++++++++---
> include/linux/mtd/nand.h | 9 ++-
> 3 files changed, 143 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
> index da93d7f..1be7fa2 100644
> --- a/drivers/mtd/nand/docg4.c
> +++ b/drivers/mtd/nand/docg4.c
> @@ -1037,7 +1037,7 @@ static int __init read_factory_bbt(struct mtd_info *mtd)
> * operation after device power-up. The above read ensures it never is.
> * Ugly, I know.
> */
> - if (nand->bbt == NULL) /* no memory-based bbt */
> + if (nand->nand_bbt == NULL) /* no memory-based bbt */
> goto exit;
>
> if (mtd->ecc_stats.failed > eccfailed_stats) {
> @@ -1064,8 +1064,8 @@ static int __init read_factory_bbt(struct mtd_info *mtd)
> unsigned long bits = ~buf[i];
> for_each_set_bit(bitnum, &bits, 8) {
> int badblock = block + 7 - bitnum;
> - nand->bbt[badblock / 4] |=
> - 0x03 << ((badblock % 4) * 2);
> + nand_bbt_markbad_factory(nand->nand_bbt,
> + badblock << nand->bbt_erase_shift);
> mtd->ecc_stats.badblocks++;
> dev_notice(doc->dev, "factory-marked bad block: %d\n",
> badblock);
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 5aec154..28d7a58 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
[...]
>
> +/* NAND BBT helper - erase a block, including reserved blocks */
> +static int nand_bbt_erase_block(struct mtd_info *mtd, loff_t addr)
> +{
> + struct erase_info einfo;
> + struct nand_chip *chip = mtd->priv;
nand_chip backpointer is no longer stored in mtd->priv (nand_chip now
embeds its own mtd_info field and we use the container_of trick to
retrieve the nand_chip pointer from the mtd_info pointer).
struct nand_chip *chip = mtd_to_nand(mtd);
> +
> + memset(&einfo, 0, sizeof(einfo));
> + einfo.mtd = mtd;
> + einfo.addr = addr;
> + einfo.len = 1ULL << chip->phys_erase_shift;
> +
> + return nand_erase_nand(mtd, &einfo, 1);
> +}
> +
[...]
> +static int nand_is_bad_bbm(struct mtd_info *mtd, loff_t addr)
> +{
> + struct nand_chip *chip = mtd->priv;
struct nand_chip *chip = mtd_to_nand(mtd);
> + struct mtd_oob_ops ops;
> + struct nand_bbt_descr *bd = chip->badblock_pattern;
> + int j, ret;
> + int numpages;
> +
> + if (bd->options & NAND_BBT_SCAN2NDPAGE)
> + numpages = 2;
> + else
> + numpages = 1;
> +
> + if (bd->options & NAND_BBT_SCANLASTPAGE)
> + addr += mtd->erasesize - (mtd->writesize * numpages);
> +
> + ops.ooblen = mtd->oobsize;
> + ops.oobbuf = chip->buffers->databuf;
> + ops.ooboffs = 0;
> + ops.datbuf = NULL;
> + ops.mode = MTD_OPS_PLACE_OOB;
> +
> + for (j = 0; j < numpages; j++) {
> + /*
> + * Read the full oob until read_oob is fixed to handle single
> + * byte reads for 16 bit buswidth.
> + */
> + ret = nand_do_read_oob(mtd, addr, &ops);
> + /* Ignore ECC errors when checking for BBM */
> + if (ret && !mtd_is_bitflip_or_eccerr(ret))
> + return ret;
> +
> + if (memcmp(chip->buffers->databuf + bd->offs,
> + bd->pattern, bd->len))
> + return 1;
> +
> + addr += mtd->writesize;
> + }
> +
> + return 0;
> +}
> +
> +static int nand_default_bbt(struct mtd_info *mtd)
> +{
> + struct nand_chip *chip = mtd->priv;
struct nand_chip *chip = mtd_to_nand(mtd);
> + struct nand_bbt *bbt = kzalloc(sizeof(struct nand_bbt), GFP_KERNEL);
> +
> + if (!bbt)
> + return -ENOMEM;
> +
> + bbt->bbt_options = chip->bbt_options;
> + bbt->mtd = mtd;
> + bbt->numchips = chip->numchips;
> + bbt->chipsize = chip->chipsize;
> + bbt->chip_shift = chip->chip_shift;
> + bbt->bbt_erase_shift = chip->phys_erase_shift;
> + bbt->page_shift = chip->page_shift;
> + bbt->bbt_td = chip->bbt_td;
> + bbt->bbt_md = chip->bbt_md;
> + bbt->is_bad_bbm = nand_is_bad_bbm;
> + bbt->erase = nand_bbt_erase_block;
> + chip->nand_bbt = bbt;
> +
> + if (!chip->badblock_pattern &&
> + nand_create_factory_badblock_pattern(chip))
> + return -ENOMEM;
> +
> + return nand_bbt_init(chip->nand_bbt);
> +}
--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
More information about the linux-mtd
mailing list