[PATCH v2 2/3] mtd: m25p80: consider max message size in m25p80_read

[Cyrille Pitchen]

Le 17/08/2016 à 21:09, Heiner Kallweit a écrit :
> Consider a message size limit when calculating the maximum amount
> of data that can be read.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
Reviewed-by: Cyrille Pitchen <cyrille.pitchen at atmel.com>

> ---
> v2:
> - use the new function spi_max_message_size
> ---
>  drivers/mtd/devices/m25p80.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index 9cf7fcd..16a7df2 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -172,7 +172,8 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
>  
>  	t[1].rx_buf = buf;
>  	t[1].rx_nbits = m25p80_rx_nbits(nor);
> -	t[1].len = min(len, spi_max_transfer_size(spi));
> +	t[1].len = min3(len, spi_max_transfer_size(spi),
> +			spi_max_message_size(spi) - t[0].len);
>  	spi_message_add_tail(&t[1], &m);
>  
>  	ret = spi_sync(spi, &m);
>