[PATCH v6 0/3] spi-nor: Add support for Intel SPI serial flash controller

[Marek Vasut]

On 12/05/2016 12:27 PM, Mika Westerberg wrote:
> On Mon, Nov 28, 2016 at 03:06:23PM +0300, Mika Westerberg wrote:
>> This is 6th iteration of the series. You can find the previous versions
>> archived on:
>>
>>   v5: https://lwn.net/Articles/706363/
>>   v4: https://lwn.net/Articles/703773/
>>   v3: https://lwn.net/Articles/697231/
>>   v2: http://lists.infradead.org/pipermail/linux-mtd/2016-June/068277.html
>>   v1: https://lkml.org/lkml/2016/6/14/269
>>
>> This patch series adds support for the Intel SPI serial flash controller
>> found on many recent Intel CPUs including Baytrail and Braswell. This
>> driver makes it possible to access the BIOS and other platform data which
>> is stored on the SPI serial flash. It is also possible to upgrade the BIOS
>> using this driver if it has not been protected by special hardware bits.
>>
>> The patch [1/3] includes documentation how to upgrade BIOS on MinnowBoard
>> MAX.
>>
>> Since poking the SPI serial flash can brick the machine, this driver can
>> only be enabled when CONFIG_EXPERT=y and even then it will remain read-only
>> unless instructed othwerwise by module parameter.
> 
> Hi Lee,
> 
> I think we have enough acks from the MTD maintainers. I wonder if you
> could merge this series via your MFD tree?
> 
Ideally you'd merge 1/3 via MTD and 2,3/3 via MFD, but I'm not sure if
that is possible and if that is a sensible thing to do.

-- 
Best regards,
Marek Vasut