[PATCH 19/46] mtd: nandsim: UAPI v1

[Daniel Walter]

From: Richard Weinberger <richard at nod.at>

expose UAPI for nandsim

Signed-off-by: Richard Weinberger <richard at nod.at>
---
 include/uapi/mtd/nandsim-user.h | 102 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)
 create mode 100644 include/uapi/mtd/nandsim-user.h

diff --git a/include/uapi/mtd/nandsim-user.h b/include/uapi/mtd/nandsim-user.h
new file mode 100644
index 0000000..14ab42a
--- /dev/null
+++ b/include/uapi/mtd/nandsim-user.h
@@ -0,0 +1,102 @@
+#ifndef __NANDSIM_USER_H__
+#define __NANDSIM_USER_H__
+
+#include <linux/types.h>
+
+#define NANDSIM_IOC_MAGIC 'n'
+
+#define NANDSIM_IOC_NEW_INSTANCE _IOW(NANDSIM_IOC_MAGIC, 0, struct ns_new_instance_req)
+#define NANDSIM_IOC_DESTROY_INSTANCE _IOW(NANDSIM_IOC_MAGIC, 1, struct ns_destroy_instance_req)
+
+#define NANDSIM_MAX_DEVICES 32
+#define NANDSIM_MAX_PARTS 32
+
+enum ns_backend_type {
+	NANDSIM_BACKEND_RAM = 0,
+	NANDSIM_BACKEND_CACHEFILE = 1,
+	NANDSIM_BACKEND_FILE = 2,
+	NANDSIM_BACKEND_MAX,
+};
+
+/**
+ * struct ns_new_instance_req - Create a new nandsim instance.
+ *
+ * @id_bytes: NAND ID of the simulated NAND chip
+ * @bus_width: bus width to emulate, either 8 or 16
+ * @bbt_mode: bad block table mode, 0 OOB, 1 BBT with marker in OOB,
+ *            2 BBT with marker in data area
+ * @no_oob: backing file contains no OOB data
+ * @bch_strength: instead of hamming ECC use BCH with given strength
+ * @parts_num: number of MTD partitions to create
+ * @parts: partition sizes in physical erase blocks, used then @parts_num > 0
+ * @backend: backend type, see @ns_backend_type
+ * @file_fd: file describtor of backend, only for @NANDSIM_BACKEND_CACHEFILE
+ *           and @NANDSIM_BACKEND_FILE.
+ * @bitflips: maximum number of random bit flips per page
+ * @overridesize: specifies the NAND size overriding the ID bytes
+ * @access_delay: initial page access delay (microseconds)
+ * @program_delay: page programm delay (microseconds)
+ * @erase_delay: sector erase delay (milliseconds)
+ * @output_cycle: word output, from flash, time (nanoseconds)
+ * @input_cycle: word input, to flash, time (nanoseconds)
+ * @simelem_num: number of simulation elements appened to this
+ *               data structure. see @ns_simelement_prop
+ *
+ * This struct is used with the @NANDSIM_IOC_NEW_INSTANCE ioctl command.
+ * It creates a new nandsim instance from the given parameter.
+ * The ioctl command returns in case of success the nandsim id of the new
+ * instance, in case of error a negative value.
+ *
+ * Not all fields in the struct have to be filled, if nandsim should
+ * use a default ignore the value, fill with 0.
+ * The only mandatory fields are @id_bytes and @bus_width.
+ * When @no_oob is non-zero @bch_strength cannot be used since
+ * @no_oob implies that no ECC is used.
+ */
+struct ns_new_instance_req {
+	__s8 id_bytes[8];
+
+	__s8 bus_width;
+	__s8 bbt_mode;
+	__s8 no_oob;
+	__s32 bch_strength;
+
+	__s8 parts_num;
+	__s32 parts[NANDSIM_MAX_PARTS];
+
+	__s8 backend;
+	__s32 file_fd;
+
+	__s32 bitflips;
+	__s32 overridesize;
+	__s32 access_delay;
+	__s32 program_delay;
+	__s32 erase_delay;
+	__s32 output_cycle;
+	__s32 input_cycle;
+
+	__s32 padding[4];
+
+	__s32 simelem_num;
+} __packed;
+
+enum {
+	NANDSIM_SIMELEM_BADBLOCK = 0,
+	NANDSIM_SIMELEM_WEAKBLOCK,
+	NANDSIM_SIMELEM_WEAKPAGE,
+	NANDSIM_SIMELEM_GRAVEPAGE,
+};
+
+struct ns_simelement_prop {
+	__s8 elem_type;
+	__s32 elem_id;
+	__s32 elem_attr;
+	__s8 padding[7];
+} __packed;
+
+struct ns_destroy_instance_req {
+	__s8 id;
+	__s8 padding[7];
+} __packed;
+
+#endif /* __NANDSIM_USER_H__ */
-- 
2.8.3