[PATCH v3 2/2] mtd: nand: fix chances to create incomplete ECC data when writing
rogercc.lin at mediatek.com
rogercc.lin at mediatek.com
Mon Aug 29 20:02:12 PDT 2016
From: RogerCC Lin <rogercc.lin at mediatek.com>
When mtk_nfc_do_write_page() comparing the sector number,because the
sector number field is at the 12th-bit position of NFI_BYTELEN
register,the masked register should be shifted 12 bits before being
compared.The result of this bug may cause the second subpage has
incomplete ECC parity bytes.
Signed-off-by: RogerCC Lin <rogercc.lin at mediatek.com>
---
drivers/mtd/nand/mtk_nand.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
index ddaa2ac..260bd20 100644
--- a/drivers/mtd/nand/mtk_nand.c
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -93,6 +93,7 @@
#define NFI_FSM_MASK (0xf << 16)
#define NFI_ADDRCNTR (0x70)
#define CNTR_MASK GENMASK(16, 12)
+#define ADDRCNTR_SEC_SHIFT (12)
#define NFI_STRADDR (0x80)
#define NFI_BYTELEN (0x84)
#define NFI_CSEL (0x90)
@@ -699,8 +700,8 @@ static int mtk_nfc_do_write_page(struct mtd_info *mtd, struct nand_chip *chip,
}
ret = readl_poll_timeout_atomic(nfc->regs + NFI_ADDRCNTR, reg,
- (reg & CNTR_MASK) >= chip->ecc.steps,
- 10, MTK_TIMEOUT);
+ ((reg & CNTR_MASK) >> ADDRCNTR_SEC_SHIFT) >= chip->ecc.steps,
+ 10, MTK_TIMEOUT);
if (ret)
dev_err(dev, "hwecc write timeout\n");
@@ -902,8 +903,8 @@ static int mtk_nfc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
dev_warn(nfc->dev, "read ahb/dma done timeout\n");
rc = readl_poll_timeout_atomic(nfc->regs + NFI_BYTELEN, reg,
- (reg & CNTR_MASK) >= sectors, 10,
- MTK_TIMEOUT);
+ ((reg & CNTR_MASK) >> ADDRCNTR_SEC_SHIFT) >= sectors,
+ 10, MTK_TIMEOUT);
if (rc < 0) {
dev_err(nfc->dev, "subpage done timeout\n");
bitflips = -EIO;
--
1.7.0.4
More information about the linux-mtd
mailing list