[PATCH] mtd: nand: Allow MTD_NAND_OMAP2 to be usable on Keystone devices

[Roger Quadros]

Some Keystone devices (e.g. K2G) include a OMAP NAND IP.
Allow the NAND driver to be usable for both
Keystone and OMAP devices.

Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 drivers/mtd/nand/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 21ff580..e6260df 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -88,11 +88,11 @@ config MTD_NAND_AMS_DELTA
 	  Support for NAND flash on Amstrad E3 (Delta).
 
 config MTD_NAND_OMAP2
-	tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
-	depends on ARCH_OMAP2PLUS
+	tristate "NAND Flash device on OMAP2, OMAP3, OMAP4 and Keystone"
+	depends on (ARCH_OMAP2PLUS || ARCH_KEYSTONE)
 	help
-          Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
-	  platforms.
+          Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
+	  and Keystone platforms.
 
 config MTD_NAND_OMAP_BCH
 	depends on MTD_NAND_OMAP2
-- 
2.7.4