[PATCH v2 1/2] mtd: brcmnand: iProc big endian and ONFI support
Kamal Dasu
kdasu.kdev at gmail.com
Mon Aug 22 08:42:55 PDT 2016
On Wed, Aug 10, 2016 at 10:24 AM, Boris Brezillon
<boris.brezillon at free-electrons.com> wrote:
> On Wed, 20 Jul 2016 14:53:50 -0700
> Ray Jui <ray.jui at broadcom.com> wrote:
>
>> This patch adds big endian and ONFI support for various iProc based
>> SoCs that use the core brcmstb NAND controller
>
> Brian, Kamal, can you review this patch?
>
>>
>> This patch was originally implemented by Prafulla Kota
>> <prafulla.kota at broadcom.com> and fully tested on iProc based NS2 SVK
>>
>> Signed-off-by: Prafulla Kota <prafulla.kota at broadcom.com>
>> Signed-off-by: Ray Jui <ray.jui at broadcom.com>
Acked-by: Kamal Dasu <kdasu.kdev at gmail.com>
>> ---
>> drivers/mtd/nand/brcmnand/brcmnand.c | 12 ++++++------
>> drivers/mtd/nand/brcmnand/brcmnand.h | 13 ++++++++-----
>> drivers/mtd/nand/brcmnand/iproc_nand.c | 18 ++++++++++++++----
>> 3 files changed, 28 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
>> index b76ad7c..12a1585 100644
>> --- a/drivers/mtd/nand/brcmnand/brcmnand.c
>> +++ b/drivers/mtd/nand/brcmnand/brcmnand.c
>> @@ -1279,7 +1279,7 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command,
>> u32 *flash_cache = (u32 *)ctrl->flash_cache;
>> int i;
>>
>> - brcmnand_soc_data_bus_prepare(ctrl->soc);
>> + brcmnand_soc_data_bus_prepare(ctrl->soc, true);
>>
>> /*
>> * Must cache the FLASH_CACHE now, since changes in
>> @@ -1292,7 +1292,7 @@ static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command,
>> */
>> flash_cache[i] = be32_to_cpu(brcmnand_read_fc(ctrl, i));
>>
>> - brcmnand_soc_data_bus_unprepare(ctrl->soc);
>> + brcmnand_soc_data_bus_unprepare(ctrl->soc, true);
>>
>> /* Cleanup from HW quirk: restore SECTOR_SIZE_1K */
>> if (host->hwcfg.sector_size_1k)
>> @@ -1508,12 +1508,12 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
>> brcmnand_waitfunc(mtd, chip);
>>
>> if (likely(buf)) {
>> - brcmnand_soc_data_bus_prepare(ctrl->soc);
>> + brcmnand_soc_data_bus_prepare(ctrl->soc, false);
>>
>> for (j = 0; j < FC_WORDS; j++, buf++)
>> *buf = brcmnand_read_fc(ctrl, j);
>>
>> - brcmnand_soc_data_bus_unprepare(ctrl->soc);
>> + brcmnand_soc_data_bus_unprepare(ctrl->soc, false);
>> }
>>
>> if (oob)
>> @@ -1678,12 +1678,12 @@ static int brcmnand_write(struct mtd_info *mtd, struct nand_chip *chip,
>> (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
>>
>> if (buf) {
>> - brcmnand_soc_data_bus_prepare(ctrl->soc);
>> + brcmnand_soc_data_bus_prepare(ctrl->soc, false);
>>
>> for (j = 0; j < FC_WORDS; j++, buf++)
>> brcmnand_write_fc(ctrl, j, *buf);
>>
>> - brcmnand_soc_data_bus_unprepare(ctrl->soc);
>> + brcmnand_soc_data_bus_unprepare(ctrl->soc, false);
>> } else if (oob) {
>> for (j = 0; j < FC_WORDS; j++)
>> brcmnand_write_fc(ctrl, j, 0xffffffff);
>> diff --git a/drivers/mtd/nand/brcmnand/brcmnand.h b/drivers/mtd/nand/brcmnand/brcmnand.h
>> index ef5eabb..5c44cd4 100644
>> --- a/drivers/mtd/nand/brcmnand/brcmnand.h
>> +++ b/drivers/mtd/nand/brcmnand/brcmnand.h
>> @@ -23,19 +23,22 @@ struct dev_pm_ops;
>> struct brcmnand_soc {
>> bool (*ctlrdy_ack)(struct brcmnand_soc *soc);
>> void (*ctlrdy_set_enabled)(struct brcmnand_soc *soc, bool en);
>> - void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare);
>> + void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare,
>> + bool is_param);
>> };
>>
>> -static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc)
>> +static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc,
>> + bool is_param)
>> {
>> if (soc && soc->prepare_data_bus)
>> - soc->prepare_data_bus(soc, true);
>> + soc->prepare_data_bus(soc, true, is_param);
>> }
>>
>> -static inline void brcmnand_soc_data_bus_unprepare(struct brcmnand_soc *soc)
>> +static inline void brcmnand_soc_data_bus_unprepare(struct brcmnand_soc *soc,
>> + bool is_param)
>> {
>> if (soc && soc->prepare_data_bus)
>> - soc->prepare_data_bus(soc, false);
>> + soc->prepare_data_bus(soc, false, is_param);
>> }
>>
>> static inline u32 brcmnand_readl(void __iomem *addr)
>> diff --git a/drivers/mtd/nand/brcmnand/iproc_nand.c b/drivers/mtd/nand/brcmnand/iproc_nand.c
>> index 585596c..4c6ae11 100644
>> --- a/drivers/mtd/nand/brcmnand/iproc_nand.c
>> +++ b/drivers/mtd/nand/brcmnand/iproc_nand.c
>> @@ -74,7 +74,8 @@ static void iproc_nand_intc_set(struct brcmnand_soc *soc, bool en)
>> spin_unlock_irqrestore(&priv->idm_lock, flags);
>> }
>>
>> -static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare)
>> +static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare,
>> + bool is_param)
>> {
>> struct iproc_nand_soc *priv =
>> container_of(soc, struct iproc_nand_soc, soc);
>> @@ -86,10 +87,19 @@ static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare)
>>
>> val = brcmnand_readl(mmio);
>>
>> - if (prepare)
>> - val |= IPROC_NAND_APB_LE_MODE;
>> - else
>> + /*
>> + * In the case of BE or when dealing with NAND data, alway configure
>> + * the APB bus to LE mode before accessing the FIFO and back to BE mode
>> + * after the access is done
>> + */
>> + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) || !is_param) {
>> + if (prepare)
>> + val |= IPROC_NAND_APB_LE_MODE;
>> + else
>> + val &= ~IPROC_NAND_APB_LE_MODE;
>> + } else { /* when in LE accessing the parameter page, keep APB in BE */
>> val &= ~IPROC_NAND_APB_LE_MODE;
>> + }
>>
>> brcmnand_writel(val, mmio);
>>
>
More information about the linux-mtd
mailing list