[RESEND v5] mtd: nand_bbt: scan for next free bbt block if writing bbt fails

Boris Brezillon boris.brezillon at free-electrons.com
Mon Aug 8 07:16:39 PDT 2016


Hi Kyle,

On Tue, 2 Aug 2016 15:01:50 -0500
Kyle Roeschley <kyle.roeschley at ni.com> wrote:

> If erasing or writing the BBT fails, we should mark the current BBT
> block as bad and use the BBT descriptor to scan for the next available
> unused block in the BBT. We should only return a failure if there isn't
> any space left.
> 
> Based on original code implemented by Jeff Westfahl
> <jeff.westfahl at ni.com>.
> 
> Signed-off-by: Kyle Roeschley <kyle.roeschley at ni.com>
> Suggested-by: Jeff Westfahl <jeff.westfahl at ni.com>
> ---
> v5: De-duplicate bad block handling
> 
> v4: Don't ignore write protection while marking bad BBT blocks
>     Correctly call block_markbad
>     Minor cleanups
> 
> v3: Don't overload mtd->priv
>     Keep nand_erase_nand from erroring on protected BBT blocks
> 
> v2: Mark OOB area in each block as well as BBT
>     Avoid marking read-only, bad address, or known bad blocks as bad
> 
>  drivers/mtd/nand/nand_bbt.c | 40 ++++++++++++++++++++++++++++++++++------
>  1 file changed, 34 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
> index 2fbb523..c9255f8 100644
> --- a/drivers/mtd/nand/nand_bbt.c
> +++ b/drivers/mtd/nand/nand_bbt.c
> @@ -620,7 +620,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
>  {
>  	struct nand_chip *this = mtd_to_nand(mtd);
>  	struct erase_info einfo;
> -	int i, res, chip = 0;
> +	int i, res, chip = 0, found_bad_block = 0;
>  	int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
>  	int nrchips, pageoffs, ooboffs;
>  	uint8_t msk[4];
> @@ -663,6 +663,27 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
>  			goto write;
>  		}
>  
> +next:
> +		if (found_bad_block) {
> +			/*
> +			 * We found a bad block on the last loop iteration.
> +			 * Mark it as such and see if there's another block
> +			 * available in the BBT area.
> +			 */
> +			int block = page >>
> +				    (this->bbt_erase_shift - this->page_shift);
> +			pr_info("nand_bbt: failed to erase block %d when writing BBT\n",
> +				block);
> +			bbt_mark_entry(this, block, BBT_BLOCK_WORN);
> +
> +			res = this->block_markbad(mtd, to);
> +			if (res)
> +				pr_warn("nand_bbt: error %d while marking block %d bad\n",
> +					res, block);
> +			td->pages[chip] = -1;
> +			found_bad_block = 0;
> +		}
> +

Yet another label in this already non-trivial function. Can we do
something like that [1][2] instead?

Regards,

Boris

>  		/*
>  		 * Automatic placement of the bad block table. Search direction
>  		 * top -> down?
> @@ -787,14 +808,21 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
>  		einfo.addr = to;
>  		einfo.len = 1 << this->bbt_erase_shift;
>  		res = nand_erase_nand(mtd, &einfo, 1);
> -		if (res < 0)
> +		if (res == -EIO) {
> +			found_bad_block = 1;
> +			goto next;
> +		} else if (res) {
>  			goto outerr;
> +		}
>  
> -		res = scan_write_bbt(mtd, to, len, buf,
> -				td->options & NAND_BBT_NO_OOB ? NULL :
> -				&buf[len]);
> -		if (res < 0)
> +		res = scan_write_bbt(mtd, to, len, buf, td->options &
> +				     NAND_BBT_NO_OOB ? NULL : &buf[len]);
> +		if (res == -EIO) {
> +			found_bad_block = 1;
> +			goto next;
> +		} else if (res) {
>  			goto outerr;
> +		}
>  
>  		pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
>  			 (unsigned long long)to, td->version[chip]);

[1]http://code.bulix.org/3xbnwr-104986
[2]http://code.bulix.org/e16nvo-104988



More information about the linux-mtd mailing list