[PATCH 0703/1285] Replace numeric parameter like 0444 with macro

[Baole Ni]

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu at intel.com>
Signed-off-by: Baole Ni <baolex.ni at intel.com>
---
 drivers/mtd/nand/nandsim.c | 48 +++++++++++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 1eb9344..08e78fd 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -115,30 +115,30 @@ static u_char id_bytes[8] = {
 	[4 ... 7] = 0xFF,
 };
 
-module_param_array(id_bytes, byte, NULL, 0400);
-module_param_named(first_id_byte, id_bytes[0], byte, 0400);
-module_param_named(second_id_byte, id_bytes[1], byte, 0400);
-module_param_named(third_id_byte, id_bytes[2], byte, 0400);
-module_param_named(fourth_id_byte, id_bytes[3], byte, 0400);
-module_param(access_delay,   uint, 0400);
-module_param(programm_delay, uint, 0400);
-module_param(erase_delay,    uint, 0400);
-module_param(output_cycle,   uint, 0400);
-module_param(input_cycle,    uint, 0400);
-module_param(bus_width,      uint, 0400);
-module_param(do_delays,      uint, 0400);
-module_param(log,            uint, 0400);
-module_param(dbg,            uint, 0400);
-module_param_array(parts, ulong, &parts_num, 0400);
-module_param(badblocks,      charp, 0400);
-module_param(weakblocks,     charp, 0400);
-module_param(weakpages,      charp, 0400);
-module_param(bitflips,       uint, 0400);
-module_param(gravepages,     charp, 0400);
-module_param(overridesize,   uint, 0400);
-module_param(cache_file,     charp, 0400);
-module_param(bbt,	     uint, 0400);
-module_param(bch,	     uint, 0400);
+module_param_array(id_bytes, byte, NULL, S_IRUSR);
+module_param_named(first_id_byte, id_bytes[0], byte, S_IRUSR);
+module_param_named(second_id_byte, id_bytes[1], byte, S_IRUSR);
+module_param_named(third_id_byte, id_bytes[2], byte, S_IRUSR);
+module_param_named(fourth_id_byte, id_bytes[3], byte, S_IRUSR);
+module_param(access_delay,   uint, S_IRUSR);
+module_param(programm_delay, uint, S_IRUSR);
+module_param(erase_delay,    uint, S_IRUSR);
+module_param(output_cycle,   uint, S_IRUSR);
+module_param(input_cycle,    uint, S_IRUSR);
+module_param(bus_width,      uint, S_IRUSR);
+module_param(do_delays,      uint, S_IRUSR);
+module_param(log,            uint, S_IRUSR);
+module_param(dbg,            uint, S_IRUSR);
+module_param_array(parts, ulong, &parts_num, S_IRUSR);
+module_param(badblocks,      charp, S_IRUSR);
+module_param(weakblocks,     charp, S_IRUSR);
+module_param(weakpages,      charp, S_IRUSR);
+module_param(bitflips,       uint, S_IRUSR);
+module_param(gravepages,     charp, S_IRUSR);
+module_param(overridesize,   uint, S_IRUSR);
+module_param(cache_file,     charp, S_IRUSR);
+module_param(bbt,	     uint, S_IRUSR);
+module_param(bch,	     uint, S_IRUSR);
 
 MODULE_PARM_DESC(id_bytes,       "The ID bytes returned by NAND Flash 'read ID' command");
 MODULE_PARM_DESC(first_id_byte,  "The first byte returned by NAND Flash 'read ID' command (manufacturer ID) (obsolete)");
-- 
2.9.2