qemu:beagle no longer booting with omap2plus_defconfig in -next

[Guenter Roeck]

On 04/24/2016 10:34 AM, Boris Brezillon wrote:
> On Sun, 24 Apr 2016 09:42:40 -0700
> Guenter Roeck <linux at roeck-us.net> wrote:
>
>> In qemu, it looks like gpmc bit 0 is considered to be the NAND chip select,
>> which is distinctly different to a chip ready pin. Guess I would have to try
>> finding a chip datasheet to figure out what this pin is supposed to do, and
>> what is wrong. Since it is somewhat unlikely that I'll find the time to do that,
>> I just disabled MTD_NAND_OMAP2 in my qemu tests instead. Not an ideal solution,
>> of course, but the alternative would be to drop the beagle qemu tests entirely.
>
> Here is a patch [1] which should fix your problem. It's obviously not
> enough to handle the different use cases we have in in the wild, but
> should fix your problem on the beagle board.
>
> Regards,
>
> Boris
>
> [1]http://code.bulix.org/i5c4yc-97598
>
Yep, I figured out that one a minute ago :-)

Thanks again!

Guenter