[PATCH 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch

Yunhui Cui yunhui.cui at nxp.com
Thu Apr 21 23:32:38 PDT 2016



> -----Original Message-----
> From: Han Xu
> Sent: Friday, April 22, 2016 12:49 PM
> To: Yunhui Cui; Yunhui Cui; dwmw2 at infradead.org;
> computersforpeace at gmail.com; han.xu at freescale.com
> Cc: linux-kernel at vger.kernel.org; linux-mtd at lists.infradead.org; linux-
> arm-kernel at lists.infradead.org; Yao Yuan
> Subject: Re: [PATCH 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch
> 
> 
> 
> ________________________________________
> From: Yunhui Cui
> Sent: Thursday, April 21, 2016 9:52 PM
> To: Han Xu; Yunhui Cui; dwmw2 at infradead.org; computersforpeace at gmail.com;
> han.xu at freescale.com
> Cc: linux-kernel at vger.kernel.org; linux-mtd at lists.infradead.org; linux-
> arm-kernel at lists.infradead.org; Yao Yuan
> Subject: RE: [PATCH 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch
> 
> > -----Original Message-----
> > From: Han Xu
> > Sent: Thursday, April 21, 2016 11:48 PM
> > To: Yunhui Cui; Yunhui Cui; dwmw2 at infradead.org;
> > computersforpeace at gmail.com; han.xu at freescale.com
> > Cc: linux-kernel at vger.kernel.org; linux-mtd at lists.infradead.org;
> > linux- arm-kernel at lists.infradead.org; Yao Yuan
> > Subject: Re: [PATCH 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch
> >
> >
> >
> > ________________________________________
> > From: Yunhui Cui
> > Sent: Thursday, April 21, 2016 3:41 AM
> > To: Han Xu; Yunhui Cui; dwmw2 at infradead.org;
> > computersforpeace at gmail.com; han.xu at freescale.com
> > Cc: linux-kernel at vger.kernel.org; linux-mtd at lists.infradead.org;
> > linux- arm-kernel at lists.infradead.org; Yao Yuan
> > Subject: RE: [PATCH 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch
> >
> > On Thu, Apr 24, 2016 at 06:37:01 AM +0800, Han Xu wrote:
> > > ________________________________________
> > > From: Yunhui Cui <B56489 at freescale.com>
> > > Sent: Wednesday, April 13, 2016 9:50 PM
> > > To: dwmw2 at infradead.org; computersforpeace at gmail.com;
> > > han.xu at freescale.com
> > > Cc: linux-kernel at vger.kernel.org; linux-mtd at lists.infradead.org;
> > > linux- arm-kernel at lists.infradead.org; Yao Yuan; Yunhui Cui
> > > Subject: [PATCH 8/9] mtd: fsl-quadspi: disable AHB buffer prefetch
> > >
> > > From: Yunhui Cui <yunhui.cui at nxp.com>
> > >
> > > A-009282: QuadSPI: QuadSPI data pre-fetch can result in incorrect
> > > data
> > > Affects: QuadSPI
> > > Description: With AHB buffer prefetch enabled, the QuadSPI may
> > > return incorrect data on the AHB interface. The buffer pre-fetch is
> > > enabled if the fetch size as configured either in the LUT or in the
> > > BUFxCR register is greater than 8 bytes.
> > > Impact: Only 64 bit read allowed.
> > > Workaround: Keep the read data size to 64 bits (8 Bytes), which
> > > disables the prefetch on the AHB buffer, and prevents this issue
> > > from
> > occurring.
> > >
> > > Signed-off-by: Yunhui Cui <yunhui.cui at nxp.com>
> > > ---
> > >  drivers/mtd/spi-nor/fsl-quadspi.c | 29
> > > +++++++++++++++++++++++------
> > >  1 file changed, 23 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c
> > > b/drivers/mtd/spi-nor/fsl- quadspi.c index fea18b6..d9f3e50 100644
> > > --- a/drivers/mtd/spi-nor/fsl-quadspi.c
> > > +++ b/drivers/mtd/spi-nor/fsl-quadspi.c
> > > @@ -752,19 +752,36 @@ static void fsl_qspi_init_abh_read(struct
> > > fsl_qspi
> > > *q)  {
> > >         void __iomem *base = q->iobase;
> > >         int seqid;
> > > +       const struct fsl_qspi_devtype_data *devtype_data =
> > > + q->devtype_data;
> > >
> > >         /* AHB configuration for access buffer 0/1/2 .*/
> > >         qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base +
> > > QUADSPI_BUF0CR);
> > >         qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base +
> > > QUADSPI_BUF1CR);
> > >         qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base +
> > > QUADSPI_BUF2CR);
> > > +
> > >         /*
> > > -        * Set ADATSZ with the maximum AHB buffer size to improve the
> > > -        * read performance.
> > > +        * Errata: A-009282: QuadSPI data prefetch may result in
> > > incorrect data
> > > +        * Workaround: Keep the read data size to 64 bits (8 bytes).
> > > +        * This disables the prefetch on the AHB buffer and
> > > +        * prevents this issue from occurring.
> > >          */
> > > -       qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
> > > -                       ((q->devtype_data->ahb_buf_size / 8)
> > > -                       << QUADSPI_BUF3CR_ADATSZ_SHIFT),
> > > -                       base + QUADSPI_BUF3CR);
> > > +       if (devtype_data->devtype == FSL_QUADSPI_LS2080A ||
> > > +           devtype_data->devtype == FSL_QUADSPI_LS1021A) {
> > >
> > > Use QUIRK, not SoC name.
> > [Yunhui] This is a SoC errata, we need distinguish according to the
> > devtype_data->devtype
> >
> > It's the same thing and we have already done that before.
> 
> > [Yunhui] your mean that I should add such as the following code:
>         #define QUADSPI_QUIRK_ERRATA_9282         (1 << 4)
>         static inline int has_errata_num_a009282(struct fsl_qspi *q)
>         {
>                  return q->devtype_data->driver_data &
> QUADSPI_QUIRK_ERRATA_9282;
>         }
> 
> I mean QUIRK can be used even for HW limitation, but it's not necessary
> to use ERRATA number as QUIRK name, you can name it with natural language,
> such as QUADSPI_QUIRK_ADASZ_8BYTE_LIMIT, and describe the reason in
> comments.
> [Yunhui] thanks, I will update it in v2.
> > /*
> >  * TKT253890, Controller needs driver to fill txfifo till 16 byte to
> >  * trigger data transfer even though extra data will not transferred.
> >  */
> > #define QUADSPI_QUIRK_TKT253890         (1 << 2)
> > /* Controller cannot wake up from wait mode, TKT245618 */
> > #define QUADSPI_QUIRK_TKT245618         (1 << 3)
> >
> >
> > > +
> > > +               qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
> > > +                               (1 << QUADSPI_BUF3CR_ADATSZ_SHIFT),
> > > +                               base + QUADSPI_BUF3CR);
> > > +
> > > +       } else {
> > > +               /*
> > > +                * Set ADATSZ with the maximum AHB buffer size to
> > > + improve
> > > the
> > > +                * read performance.
> > > +               */
> > > +               qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK |
> > > +                               ((q->devtype_data->ahb_buf_size / 8)
> > > +                               << QUADSPI_BUF3CR_ADATSZ_SHIFT),
> > > +                               base + QUADSPI_BUF3CR);
> > > +       }
> > >
> > >         /* We only use the buffer3 */
> > >         qspi_writel(q, 0, base + QUADSPI_BUF0IND);
> > > --
> > > 2.1.0.27.g96db324




More information about the linux-mtd mailing list