[PATCH 04/12] mtd: nand: atmel: set ECC algorithm explicitly

[Boris Brezillon]

On Fri, 15 Apr 2016 21:54:04 +0200
Rafał Miłecki <zajec5 at gmail.com> wrote:

> Set it to value obtained from platform data with fallback to Hamming.
> This is part of process deprecating NAND_ECC_SOFT_BCH (and switching to
> enum nand_ecc_algo).
> 
> Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
> ---
>  drivers/mtd/nand/atmel_nand.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index eec8ca7..6aa82e4 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -1212,6 +1212,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
>  		dev_warn(host->dev,
>  			"Can't get I/O resource regs for PMECC controller, rolling back on software ECC\n");
>  		nand_chip->ecc.mode = NAND_ECC_SOFT;
> +		nand_chip->ecc.algo = NAND_ECC_HAMMING;
>  		return 0;
>  	}
>  
> @@ -1295,6 +1296,7 @@ static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
>  		/* page size not handled by HW ECC */
>  		/* switching back to soft ECC */
>  		nand_chip->ecc.mode = NAND_ECC_SOFT;
> +		nand_chip->ecc.algo = NAND_ECC_HAMMING;
>  		return 0;
>  	}
>  
> @@ -1613,6 +1615,7 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
>  	 * even if the nand-ecc-mode property is not defined.
>  	 */
>  	host->nand_chip.ecc.mode = NAND_ECC_SOFT;
> +	host->nand_chip.ecc.algo = NAND_ECC_HAMMING;
>  
>  	return 0;
>  }
> @@ -1629,6 +1632,7 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev,
>  		dev_err(host->dev,
>  			"Can't get I/O resource regs, use software ECC\n");
>  		nand_chip->ecc.mode = NAND_ECC_SOFT;
> +		nand_chip->ecc.algo = NAND_ECC_HAMMING;
>  		return 0;
>  	}
>  
> @@ -1661,6 +1665,7 @@ static int atmel_hw_nand_init_params(struct platform_device *pdev,
>  		/* page size not handled by HW ECC */
>  		/* switching back to soft ECC */
>  		nand_chip->ecc.mode = NAND_ECC_SOFT;
> +		nand_chip->ecc.algo = NAND_ECC_HAMMING;
>  		return 0;
>  	}
>  
> @@ -2159,6 +2164,7 @@ static int atmel_nand_probe(struct platform_device *pdev)
>  		memcpy(&host->board, dev_get_platdata(&pdev->dev),
>  		       sizeof(struct atmel_nand_data));
>  		nand_chip->ecc.mode = host->board.ecc_mode;
> +		nand_chip->ecc.algo = host->board.ecc_algo;

If you follow my suggestion on patch 3, it should be:

		if (host->board.ecc_mode == NAND_ECC_SOFT)
			nand_chip->ecc.algo = NAND_ECC_HAMMING;

This way we avoid any dependency between the avr32 and nand tree.

>  
>  		/* 16-bit bus width */
>  		if (host->board.bus_width_16)



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com