[PATCH v6 00/17] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms
Roger Quadros
rogerq at ti.com
Fri Apr 15 02:34:04 PDT 2016
Tony & Boris,
On 14/04/16 00:25, Tony Lindgren wrote:
> * Roger Quadros <rogerq at ti.com> [160407 03:10]:
>> Hi,
>>
>> As this series has cross dependency between omap and mtd subsystems,
>> I'll set up a immutable branch which omap-soc and l2-mtd must
>> merge in together to avoid any conflicts/breakage during integration.
>>
>> Brian has acked all mtd patches. Tony needs to give his Ack for the
>> gpmc driver part and then I can provide the immutable branch.
>
> Looks good to me, please feel free to add:
>
> Acked-by: Tony Lindgren <tony at atomide.com>
>
I've added Tony and Rob's Acked-by tags and pushed the patches at the
below PULL request.
Please take this into omap-soc and l2-mtd trees. Thanks.
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git at github.com:rogerq/linux.git for-v4.7/gpmc-mtd-common
for you to fetch changes up to 10f22ee367c4aff7841da6a83c10445d7d6328d9:
mtd: nand: omap2: Implement NAND ready using gpiolib (2016-04-15 11:55:37 +0300)
----------------------------------------------------------------
Roger Quadros (17):
ARM: OMAP2+: gpmc: Add platform data
ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data
memory: omap-gpmc: Introduce GPMC to NAND interface
memory: omap-gpmc: Add GPMC-NAND ops to get writebufferempty status
memory: omap-gpmc: Implement IRQ domain for NAND IRQs
mtd: nand: omap: Use gpmc_omap_get_nand_ops() to get NAND registers
mtd: nand: omap: Switch to using GPMC-NAND ops for writebuffer empty check
mtd: nand: omap: Copy platform data parameters to omap_nand_info data
mtd: nand: omap: Clean up device tree support
mtd: nand: omap: Update DT binding documentation
memory: omap-gpmc: Prevent mapping into 1st 16MB
memory: omap-gpmc: Move device tree binding to correct location
memory: omap-gpmc: Support general purpose input for WAITPINs
memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring
memory: omap-gpmc: Support WAIT pin edge interrupts
memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs
mtd: nand: omap2: Implement NAND ready using gpiolib
Documentation/devicetree/bindings/{bus/ti-gpmc.txt => memory-controllers/omap-gpmc.txt} | 17 +++
Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 19 +++-
arch/arm/mach-omap2/gpmc-nand.c | 7 +-
drivers/memory/Kconfig | 1 +
drivers/memory/omap-gpmc.c | 655 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------------------------
drivers/mtd/nand/omap2.c | 194 +++++++++++++++++++++++++++-------
include/linux/omap-gpmc.h | 172 ++++++------------------------
include/linux/platform_data/gpmc-omap.h | 172 ++++++++++++++++++++++++++++++
include/linux/platform_data/mtd-nand-omap2.h | 12 ++-
9 files changed, 817 insertions(+), 432 deletions(-)
rename Documentation/devicetree/bindings/{bus/ti-gpmc.txt => memory-controllers/omap-gpmc.txt} (89%)
create mode 100644 include/linux/platform_data/gpmc-omap.h
--
cheers,
-roger
More information about the linux-mtd
mailing list