[PATCH v4 0/3] mtd: nand: jz4780: Add NAND and BCH drivers

[Ezequiel Garcia]

On 7 September 2015 at 11:54, Alex Smith <alex.smith at imgtec.com> wrote:
> On 06/09/2015 21:38, Ezequiel Garcia wrote:
>> On 27 Jul 02:50 PM, Alex Smith wrote:
>>> Hi,
>>>
>>> This series adds support for the BCH controller and NAND devices on
>>> the Ingenic JZ4780 SoC.
>>>
>>> Tested on the MIPS Creator Ci20 board. All dependencies are now in
>>> mainline so it should be possible to compile test now.
>>>
>>> This version of the series has been rebased on 4.2-rc4, and also adds
>>> an additional patch to fix an issue that was encountered in the
>>> external Ci20 3.18 kernel branch.
>>>
>>> Review and feedback welcome.
>>>
>>
>> The NEMC driver seems to be upstream. Any chance you submit devicetree
>> changes as well for Ci20 (so we can actually test this)?
>
> Sure, can do. The pinctrl driver is not yet upstream (needs some work) which is why I didn't add the DT changes initially, but at least if you boot the board from the NAND then U-Boot should have left everything in a state usable by the kernel.
>

Great, thanks! I definitely look forward to test this.
-- 
Ezequiel García, VanguardiaSur
www.vanguardiasur.com.ar