[PATCH 1/3] mtd: spi-nor: Use write_sr for write status

[Jagan Teki]

On 19 August 2015 at 15:26, Jagan Teki <jteki at openedev.com> wrote:
> Use existing write_sr() call instead of decoding and
> calling nor->write_reg separately.
>
> Signed-off-by: Jagan Teki <jteki at openedev.com>
> Cc: David Woodhouse <dwmw2 at infradead.org>
> Cc: Brian Norris <computersforpeace at gmail.com>
> ---
>  drivers/mtd/spi-nor/spi-nor.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 47516d3..3e198b4 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -869,8 +869,7 @@ static int macronix_quad_enable(struct spi_nor *nor)
>         val = read_sr(nor);
>         write_enable(nor);
>
> -       nor->cmd_buf[0] = val | SR_QUAD_EN_MX;
> -       nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1, 0);
> +       write_sr(nor, val | SR_QUAD_EN_MX);
>
>         if (spi_nor_wait_till_ready(nor))
>                 return 1;
> --
> 1.9.1
>

Ping


-- 
Jagan | openedev.