[PATCH] mtd: nand: omap2: Rename shippable module to omap2_nand

[Brian Norris]

On Fri, Aug 21, 2015 at 01:45:35PM +0300, Roger Quadros wrote:
> As both omap2 onenand and omap2 nand driver modules are
> named the same i.e. "omap2.ko", only one of them gets shipped
> during MODPOST if both are configured as loadable modules.
> 
> To avoid this ambiguity let's ship the omap2 nand
> driver as "omap2_nand.ko"
> 
> Reported by Pierre Neyron via github
> https://github.com/beagleboard/linux/issues/40
> 
> Cc: Robert Nelson <robertcnelson at gmail.com>
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> ---
>  drivers/mtd/nand/Makefile | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 1f897ec..075a027 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -26,7 +26,8 @@ obj-$(CONFIG_MTD_NAND_CS553X)		+= cs553x_nand.o
>  obj-$(CONFIG_MTD_NAND_NDFC)		+= ndfc.o
>  obj-$(CONFIG_MTD_NAND_ATMEL)		+= atmel_nand.o
>  obj-$(CONFIG_MTD_NAND_GPIO)		+= gpio.o
> -obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2.o
> +omap2_nand-objs := omap2.o
> +obj-$(CONFIG_MTD_NAND_OMAP2) 		+= omap2_nand.o

Pushed to l2-mtd.git. I suppose this one should go out for 4.3, as
there's little downside to it, and it's kind of a bugfix.

Brian

>  obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD)	+= omap_elm.o
>  obj-$(CONFIG_MTD_NAND_CM_X270)		+= cmx270_nand.o
>  obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
> -- 
> 2.1.4
>