[PATCH v5 0/3] Mediatek SPI-NOR flash driver

[Bayi Cheng]

This series is based on v4.3-rc1 and l2-mtd.git
(git://git.infradead.org/l2-mtd.git)

Change in v5:
1: add "status = "disable"" to device tree
2: add document "flash" node
3: fix some statement error in Kconfig file
4: fix alphabetical order error in makefile
5: delete the parament "mtd_info *mtd" in mt8173_nor structure
6: delete SPINOR_OP_WREN repeated calls
7: add mt8173_nor_do_tx & mt8173_nor_do_rx for them full potential
8: use a subnode to represent the flash

Change in v4:
1: delete the parament "write_enable" for mt8173_nor_write_reg
2: fix the build warning for calling mt8173_nor_write_single_byte

Change in v3:
1: use switch() to replace some if-else statement
2: use shifts to replace endianness statement
3: delete some unused macros
4: use auto-increment mechanism for single write
5: write address added to 32bytes

Change in v2:
1. Rebase to 4.3-rc1
2. propagate error code
3. delete mux clock and axi clock in dts file
4. descripts more exactly for binding file
5. change file names from mtk-nor.c to mtk_quadspi.c
6. delete some functions witch were used once time

Bayi Cheng (3):
  doc: dt: add documentation for Mediatek spi-nor controller
  mtd: mtk-nor: mtk serial flash controller driver
  arm64: dts: mt8173: Add nor flash node

 .../devicetree/bindings/mtd/mtk-quadspi.txt        |  41 ++
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |  16 +
 drivers/mtd/spi-nor/Kconfig                        |   7 +
 drivers/mtd/spi-nor/Makefile                       |   1 +
 drivers/mtd/spi-nor/mtk-quadspi.c                  | 491 +++++++++++++++++++++
 5 files changed, 556 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
 create mode 100644 drivers/mtd/spi-nor/mtk-quadspi.c

--
1.8.1.1.dirty