[PATCH] mtd: fsl-quadspi: change the obfuscate macro definition

[Han Xu]

Change the READ/WRITE to FSL_READ/FSL_WRITE to de-obfuscate the
concatenating string in LUT macro.

Signed-off-by: Han Xu <b45815 at freescale.com>
---
 drivers/mtd/spi-nor/fsl-quadspi.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index dc38389..7b10ed4 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -155,15 +155,15 @@
 #define LUT_MODE		4
 #define LUT_MODE2		5
 #define LUT_MODE4		6
-#define LUT_READ		7
-#define LUT_WRITE		8
+#define LUT_FSL_READ		7
+#define LUT_FSL_WRITE		8
 #define LUT_JMP_ON_CS		9
 #define LUT_ADDR_DDR		10
 #define LUT_MODE_DDR		11
 #define LUT_MODE2_DDR		12
 #define LUT_MODE4_DDR		13
-#define LUT_READ_DDR		14
-#define LUT_WRITE_DDR		15
+#define LUT_FSL_READ_DDR		14
+#define LUT_FSL_WRITE_DDR		15
 #define LUT_DATA_LEARN		16
 
 /*
@@ -366,7 +366,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 
 	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
-	writel(LUT0(DUMMY, PAD1, dummy) | LUT1(READ, PAD4, rxfifo),
+	writel(LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
 			base + QUADSPI_LUT(lut_base + 1));
 
 	/* Write enable */
@@ -387,11 +387,11 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 
 	writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
 			base + QUADSPI_LUT(lut_base));
-	writel(LUT0(WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1));
+	writel(LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1));
 
 	/* Read Status */
 	lut_base = SEQID_RDSR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(READ, PAD1, 0x1),
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(FSL_READ, PAD1, 0x1),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Erase a sector */
@@ -410,17 +410,17 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
 
 	/* READ ID */
 	lut_base = SEQID_RDID * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(READ, PAD1, 0x8),
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(FSL_READ, PAD1, 0x8),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Write Register */
 	lut_base = SEQID_WRSR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(WRITE, PAD1, 0x2),
+	writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(FSL_WRITE, PAD1, 0x2),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Read Configuration Register */
 	lut_base = SEQID_RDCR * 4;
-	writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(READ, PAD1, 0x1),
+	writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(FSL_READ, PAD1, 0x1),
 			base + QUADSPI_LUT(lut_base));
 
 	/* Write disable */
-- 
1.9.1