[PATCH 1/2] mtd: lpc32xx_slc: fix warnings caused by enabling unprepared clock
Vladimir Zapolskiy
vz at mleia.com
Sat Oct 17 11:09:29 PDT 2015
If common clock framework is configured, the driver generates a warning,
which is fixed by this change:
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc2+ #201
Hardware name: LPC32XX SoC (Flattened Device Tree)
Backtrace:
[<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c)
[<>] (show_stack) from [<>] (dump_stack+0x20/0x28)
[<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8)
[<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c)
[<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4)
[<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38)
[<>] (clk_enable) from [<>] (lpc32xx_nand_probe+0x290/0x568)
[<>] (lpc32xx_nand_probe) from [<>] (platform_drv_probe+0x50/0xa0)
[<>] (platform_drv_probe) from [<>] (driver_probe_device+0x18c/0x408)
[<>] (driver_probe_device) from [<>] (__driver_attach+0x70/0x94)
[<>] (__driver_attach) from [<>] (bus_for_each_dev+0x74/0x98)
[<>] (bus_for_each_dev) from [<>] (driver_attach+0x20/0x28)
[<>] (driver_attach) from [<>] (bus_add_driver+0x11c/0x248)
[<>] (bus_add_driver) from [<>] (driver_register+0xa4/0xe8)
[<>] (driver_register) from [<>] (__platform_driver_register+0x50/0x64)
[<>] (__platform_driver_register) from [<>] (lpc32xx_nand_driver_init+0x18/0x20)
[<>] (lpc32xx_nand_driver_init) from [<>] (do_one_initcall+0x11c/0x1dc)
[<>] (do_one_initcall) from [<>] (kernel_init_freeable+0x10c/0x1d4)
[<>] (kernel_init_freeable) from [<>] (kernel_init+0x10/0xec)
[<>] (kernel_init) from [<>] (ret_from_fork+0x14/0x24)
Signed-off-by: Vladimir Zapolskiy <vz at mleia.com>
---
drivers/mtd/nand/lpc32xx_slc.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
index 40c06b2..4f3d4eb 100644
--- a/drivers/mtd/nand/lpc32xx_slc.c
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -814,7 +814,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
res = -ENOENT;
goto err_exit1;
}
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
/* Set NAND IO addresses and command/ready functions */
chip->IO_ADDR_R = SLC_DATA(host->io_base);
@@ -919,7 +919,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
err_exit3:
dma_release_channel(host->dma_chan);
err_exit2:
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
err_exit1:
lpc32xx_wp_enable(host);
@@ -943,7 +943,7 @@ static int lpc32xx_nand_remove(struct platform_device *pdev)
tmp &= ~SLCCFG_CE_LOW;
writel(tmp, SLC_CTRL(host->io_base));
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
lpc32xx_wp_enable(host);
return 0;
@@ -955,7 +955,7 @@ static int lpc32xx_nand_resume(struct platform_device *pdev)
struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
/* Re-enable NAND clock */
- clk_enable(host->clk);
+ clk_prepare_enable(host->clk);
/* Fresh init of NAND controller */
lpc32xx_nand_setup(host);
@@ -980,7 +980,7 @@ static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
lpc32xx_wp_enable(host);
/* Disable clock */
- clk_disable(host->clk);
+ clk_disable_unprepare(host->clk);
return 0;
}
--
2.1.4
More information about the linux-mtd
mailing list