[PATCH 5/5] ARM: OMAP2+: Update gpmc and nand DT binding documentation
Roger Quadros
rogerq at ti.com
Wed Oct 14 04:50:23 PDT 2015
On 13/10/15 04:38, Franklin S Cooper Jr wrote:
> Add additional details to the gpmc and nand documentation to clarify
> what is needed to enable nand dma prefetch.
>
> Signed-off-by: Franklin S Cooper Jr <fcooper at ti.com>
> ---
> Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt | 7 ++++++-
> Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 2 ++
> 2 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> index 704be93..b1e2802 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> +++ b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
> @@ -33,6 +33,10 @@ Required properties:
> As this will change in the future, filling correct
> values here is a requirement.
>
> +GPMC DMA information. Required only when GPMC nand prefetch is enabled.
> + - dmas GPMC nand prefetch dma channel
s/nand/NAND
> + - dma-names DMA channel name use as a reference within the Nand driver
s/Nand/NAND
This is inevitably going to be "rxtx". So why not say that it should be "rxtx"
Should these bindings go in bindings/mtd/gpmc-nand.txt instead?
> +
> Timing properties for child nodes. All are optional and default to 0.
>
> - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds
> @@ -119,7 +123,8 @@ Example for an AM33xx board:
> ti,hwmods = "gpmc";
> reg = <0x50000000 0x2000>;
> interrupts = <100>;
> -
> + dmas = <&edma 52>;
> + dma-names = "rxtx";
Why not define these in the NAND node instead of gpmc node?
> gpmc,num-cs = <8>;
> gpmc,num-waitpins = <2>;
> #address-cells = <2>;
> diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> index 253e6de..4b0c240 100644
> --- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
> @@ -61,6 +61,8 @@ Example for an AM33xx board:
> ti,hwmods = "gpmc";
> reg = <0x50000000 0x36c>;
> interrupts = <100>;
> + dmas = <&edma 52>;
> + dma-names = "rxtx";
> gpmc,num-cs = <8>;
> gpmc,num-waitpins = <2>;
> #address-cells = <2>;
>
cheers,
-roger
More information about the linux-mtd
mailing list